Renovation of a water / sewer project in Cleveland, Ohio. Completed plans call for the renovation of a water / sewer project.

Bids Under $50,000 Gorman Rupp Gasoline Engine Driven Self Priming Centrifugal Pump Model 12D-GX160, 180 GPM, Honda Power with a 2" Camlock on Inlet The unit shall be a new, current, standard model of the type specified. The unit shall be a self-priming centrifugal pump. The unit shall be of heavy-duty construction and capable of sustained operation in a commercial/municipal operation. The unit shall have an intake size of 2 inches by 2 inches. The unit shall include a 2-inch camlock on inlet. The unit shall have a net weight of 85 pounds. The unit shall have an aluminum casing and gray iron cutwater insert. The unit shall have an iron semi-open type, two-vane impeller capable of handling 1 3/16 inch (30, 2 mm) diameter spherical solids. The unit shall have a replaceable carbon steel wear plate. The unit shall have a double, grease-lubricated seal with a spring-loaded grease cup, sintered bronze stationary seal seats, and steel rotating faces. The unit shall be capable of withstanding temperatures of up to 100 degrees Fahrenheit and suction pressure of up to 10 pounds per square inch. The unit shall have an air-cooled, single-cylinder, 4-cycle, gasoline engine. The unit s engine shall be capable of continuous operation at 4.68 hp & 3600 rpm. The unit s engine shall be capable of dynamic operation at 5.5 hp and 3600 rpm. The unit s engine displacement shall be 9.9 cubic inches. The unit shall have a fuel tank capacity of 3.8 quarts. A unit with one or more casing, impeller, or insert made of plastic shall not be acceptable. The unit shall be furnished with the following standard equipment: Roll cage with rubber feet Strainer 90 degree discharge elbow Operator s manual Parts book The unit shall be a Gorman-Rupp 12D-GX160, no substitutes. Evaluation and award will be based on the lowest and best bid received, delivery time will be factored in the overall evaluation process. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.