Renovation of a fire / police facility in Camarillo, California. Completed plans call for the renovation of a fire / police facility.

The proposed project generally includes the rehabilitation of Taxiway B, adjacent hangar taxilanes, and East/West Apron areas. Portions of the project will be reconstructed, while others will receive rehabilitation via mill/overlay, crack sealing and surface area seal coat. New pavement markings will be placed on the apron. The Work to be completed hereunder is at Fire Station 50 located at 189 Las Posas Road, Camarillo, California 93010. Estimated cost of construction is: $182,800.00 RFI's DUE: 4/13/22 Each proposal must be accompanied by a certified check or bid bond, in the amount of five percent (5%) of the total maximum proposal price (combination of base bid or alternate bid plus add-on items) for the contract in the form and subject to the conditions provided in the Preparation of Proposal. Every request concerning this project must be made in writing or email addressed to Hannah Brazil of C&S Engineers, Inc. (hbrazil@cscos.com) at C&S Engineers, Inc., located at 2355 Northside Drive., Suite 350, San Diego, CA 92108, and to be given consideration must be received at the above address at least ten (10) calendar days prior to the date fixed for opening of bids. The Owner reserves the right to waive any informality in the proposal, and to reject any and all proposals. For information contact the Aviation Division office for this project: TLMA/Aviation, 4080 Lemon Street 14th Floor, Riverside, CA 92501 Alternative formats available upon request to individuals with disabilities. Demolish existing improvements to make room for the expansion of the fitness room and a bathroom. This includes, flooring, ceiling grid system, non-loading bearing walls of two dorms, the existing fitness room, a bathroom, the shop, ceiling and wall features as identified on the plans. Coordinate with fire personnel, prior to and during demolition phase, to salvage, surplus, trash or reuse existing furniture, equipment, tools, doors, bathroom dispensers and mirror, as well as electrical and mechanical items noted on the plans. Construct new and fill-in wood frame walls per plan for expanded accessible bathroom and fitness room footprints including relocation of existing doors and frames. Remodel bathroom per plan to meet accessibility codes. This includes grab bars, new shower, toilet, shower heads, controls and hosing, shower seat, tile work, signage, vanity and sink. Various existing dispensers as well as the mirror and above mirror lighting fixture will be reused in the remodeled bathroom, per plan. Construct new acoustical tile suspended ceiling grid system per plan. Clean, reuse and adjust location of existing mechanical diffusers, ducts and bathroom exhaust fan. Furnish and install new carbon monoxide sensor and 1000 CFM exhaust fan in expanded fitness room with exterior damper. The system shall be rebalanced following completion of mechanical installations. Reinstall existing electrical fixtures, speakers, and smoke detectors noted on the plans. Furnish and install new speakers, smoke detectors, occupancy and photo cell sensors, emergency exit lights as well as other electrical components called out on the plans such as switches, receptacle outlets, light fixtures, TV, Phone, internet and intercom outlets and all associated conduit, cabling and wiring. Purchase, installation and testing of alerting speakers shall be coordinated with Fire Telecom staff. Patch and paint all walls in improvement area as well as complete flooring and room finishes per schedules and notes identified on the plans. Furnish and install new fitness room mirrors as well as wall backing for the TV. All Work must be completed within 50 working days