Renovation of a municipal facility in Alexandria, Kentucky. Completed plans call for the renovation of a municipal facility.

Work included in this section of the Specifications shall include the furnishing of all labor, material, tools, approvals, utility connection fees, excavation, backfill, and other equipment necessary to install the electrical system as shown on the Contract Drawings and as specified herein. B. It also includes installation and connection of all electrical utilization equipment included in this Contract but furnished by other contractors or suppliers. It is the general intent that all motors shall be furnished with the particular object of equipment it drives, except where a new motor is to be provided for an item of existing equipment (a replacement motor), then it shall be provided under this Division of the Specifications. D. The Contractor shall furnish and install all conduit, wire, disconnect switches and miscellaneous material to make all electrical connections to all items of utilization equipment or wiring devices except as otherwise specified. E. Equipment connections shall be made with flexible or rigid conduit as required. Controllers for motors, disconnect switches, and all control, protective and signal devices for motor circuits, except where such apparatus is furnished mounted and connected integrally with the motor driven equipment, shall be installed, connected and left in operating condition. The number and size of conductors between motors and control or protective apparatus shall be as required to obtain the operation described in these Specifications, and/or by the Contract Documents, and/or as shown in manufacturer furnished, Engineer reviewed Shop Drawings. F. All devices and items of electrical equipment, including those shown on the Contract Drawings but not specifically mentioned in the Specifications or those mentioned in the Specifications but not shown on the Contract Drawings, are to be furnished under this section of the specifications. Any such device or item of equipment, if not defined in quality, shall be equal to similar Equipment and/or devices specified herein. G. All devices and items of equipment mentioned in this section of the Specifications whether electrical or not or whether furnished under this or other Division of the Specifications, shall be installed under this Division of the Specifications, unless specifically indicated otherwise. H. Where wiring diagrams are not shown on the Contract Drawings, they are to be provided by the supplier of the equipment served and such diagrams shall be adhered to except as herein modified. I. The following is a list of items that may not be defined clearly on the Contract Drawings or in other parts of these Specifications. The list is meant to be an aid to the Contractor and is not necessarily a complete list of all work to be performed under this Contract: 1. Connect all motors and accessories furnished by equipment suppliers. 2. Furnish, install, and connect all motor controls. 3. Furnish, install, and connect lighting, indoor and outdoor. 4. Furnish, install, and connect power and signal lines to all instrumentation equipment, and accessories. 5. Furnish, install, and connect all electrical conduit, duct and cables. 6. Furnish, install, and connect all telephone boxes, outlets, etc. 7. Furnish, install, and connect all utility poles, line wire, and hardware. 8. Furnish, install, and connect all power distribution equipment. 9. Abandon and remove all existing wiring and materials not to be reused in the renovated plant, as shown on the Contract Drawings. 10. Furnish and install standby power equipment. 11. Furnish and install fire alarm control panel, devices, and wiring. 12. All HVAC control wiring is by the Temperature Controls Contractor for Division 23. 13. Furnish and install communications system equipment. 14. Furnish and install all fiber optic system cables, conduits and accessories.