Demolition, site work, renovation and addition to a mixed-use development in Wright Patterson AFB, Ohio. Conceptual plans call for the addition of a 1,500-square-foot, two-story above grade laboratory facility; for the renovation of a 2,850-square-foot laboratory facility; for site work for a water / sewer project; and laboratory facility.

A market survey is being conducted to determine if there are a reasonable number of interested small business concerns to set this future project aside for them. If your firm is a Small Business, certified HUBZone, 8A, Woman-Owned Small Business or Service-Disabled Veteran Owned Business and you are interested in this project please respond appropriately. Project Location: Wright-Patterson Air Force Base, Dayton, Ohio Project Description: The proposed project is to add lab space by constructing two new floors, 8th and 9th floors (approximately 1,500 net square feet), to the existing 13 story research tower with the 9th floor as secure SAP (Special Access Program) lab space. Renovate the 10th floor to provide SAP includes installing new fire suppression in added space, new rest room facilities with all necessary plumbing and fixtures, new power and lighting, new elevator access, new HVAC duct & controls by tying into existing nearby duct/piping dedicated & originally sized for heating/cooling for up to three additional floors (no increase in HVAC tonnage is required), and new balconies on 8th, 9th, 10th,, 11th, and 12th floors (approximately 1,350 net square feet). Remove and replace existing electrical bus, elevator, loading dock leveler, and wall/floor/ceiling finishes, that have reached the end of their useful life and bring up to current standards. This project will comply with applicable DoD Air Force, and base design standards. In addition, local materials and construction techniques shall be used where cost effective. Facilities will be designed as permanent construction in accordance with the DoD Unified Facilities Criteria (UFC 3-260-02). This project will comply with DoD antiterrorism/force protection requirements per UFC 4-010-01. Contract duration is estimated at 730 calendar days. The estimated cost range is between $5,000,000 and $10,000,000. NAICS code is 236220. All interested Small Businesses, certified HUBZONE, 8A, Woman-Owned Small Businesses or Service-Disabled Veteran Owned Business contractors should respond to this survey by email 22 April 2022 by 12:00 PM Eastern Standard Time. Responses should include: Identification and verification of the company's small business status. Contractor's Unique Entity Identifier(s) (formerly DUNS Number) and CAGE Code(s). Documentation from the firm's bonding company showing current single and aggregate performance and payment bond limits. Descriptions of Experience - Interested construction firms must provide descriptions of up to (3) three projects with greater than 95% completion by you as the prime contractor within the past five (5) years which are similar to this project in size and scope. Each project must include the name, title, project role, e-mail address, and telephone number of at least one reference. References may be used to verify project size, scope, dollar value, percentages and quality of performance. Example projects must be of similar size and scope. Projects similar in scope to this project include: Projects considered similar to this project include but are not limited to vertical construction projects consisting of additions to elevated concrete structures with electrical, elevator, HVAC and laboratory upgrades. In addition, similar projects would have had ICD 705 requirements. Projects similar in size to this project include: Projects similar in size would consist of elevated vertical construction renovation and addition with total renovated square feet of 2,850 square feet. Based on the information above, for each project submitted, include: Current percentage of construction complete and the date when it was or will be completed. Scope of the project. Please make sure you discuss experience in the following four areas if applicable. Size of the project (dollar value and capacity of mechanical equipment). The dollar value of the construction contract and whether it was design-bid build or design-build. The portion and percentage of the contract cost, excluding cost of materials that was self-performed as physical vertical and horizontal construction by construction trade. Describe the work your company self-performed Provide 2 references ICD 705 Requirements: This project will include the addition and renovation of space with ICD 705 requirements. Knowing the ICD 705 is required, does this affect your ability/desire in anyway to successfully perform the work 6. Small Businesses are reminded under FAR 52.219-14, Limitations on Subcontracting; they must perform at least 15% of the cost of the contract, not including the cost of materials, with the firm's own employees for general construction-type procurement. Include the percentage of work that will be self-performed on this project, and how it will be accomplished. NOTE: Total submittal package shall be no longer than 8 pages. Please only include a narrative of the requested information; additional information will not be reviewed. Email responses and any questions to Alexa Dukes at Alexa.L.Dukes@usace.army.mil. This is NOT a Request for Proposal and does not constitute any commitment by the Government. Responses to this sources sought notice will be used by the Government to make appropriate acquisition decisions. All interested sources must respond to future solicitation announcements separately for responses to this market survey. NOTICE: The following information is provided for situational awareness and is not required to respond to this Sources Sought. All contractors must be registered in the System for Award Management (www.SAM.gov) prior to award of a contract. All proposed contractors are highly encouraged to review FAR Clause 52.232-33 Payments by Electronic Funds Transfer - System for Award Management, which indicates "All payments by the Government under this contract shall be made by electronic funds transfer (EFT)." Those not currently registered can obtain registration by going to the website http://www.SAM.gov. The process can usually be completed from 24 to 48 hours after submission. Contractors will need to obtain a Unique Entity Identifier (formerly DUNS number) for processing their registration. If you do not already have a Unique Entity Identifier, one can be obtained from http://www.SAM.gov. Refer to www.SAM.gov for information formerly found in CCR, EPLS, ORCA and FedReg. Please begin the registration process immediately in order to avoid delay of the contract award should your firm be selected. As of October 24, 2022, the project is currently under evaluation stage. An issuance of draft request for proposal to short-listed firms has not been released. Further details regarding design and construction timelines have not been identified. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.