Site work for a playground / park / athletic field in Ragley, Louisiana. Completed plans call for site work for a playground / park / athletic field.

The deposit of all other set of documents will be refunded fifty percent (50%) upon return of documents as stated above. Complete bidding documents including drawings and specifications are available from the Architect in Digital Format (PDF) for a non-refundable charge of $25.00. *Prime bidders are defined as licensed Building Contractors bidding this project as such. 5.Preference is given to materials, supplies, and provisions that are produced, manufactured, or grown in Louisiana, quality being equal to articles offered by competitors outside the State. 8.Bids shall be accepted only from contractors who are licensed under LSA-R.S. 37:2150-2163 for Building Construction classifications. No bid may be withdrawn for a period of forty-five (45) days after receipt of bids, except under the provisions of LSA R.S. 38:2214. 9.The Owner reserves the right to reject any and all bids for just cause. In accordance with LSA-R.S. 38:2212(A)(1)(b), the provisions and requirements of this Section, those stated in the advertisement for bids, and those required on the Bid Form shall not be considered as informalities and shall not be waived by any public entity. 10.The public shall incur no obligation to the Contractor until the Contract between the Owner and the Contractor is fully executed. 12.Official action on this bid will be taken within forty-five (45) days by the South Beauregard Recreation District No. 2 of Beauregard Parish, except as may be extended by mutual written consent with the lowest responsible bidder. DESCRIPTION A. Contractor shall provide and install all materials for complete and operational systems as listed below. PART 2 - PRODUCTS 2.1 RACEWAYS AND FITTINGS A. Metal raceways acceptable for use on this project shall be: 1. Galvanized rigid steel conduit 2. Electrical metallic tubing 3. Intermediate metal conduit (IMC) 4. Flexible metal conduit. 5. Liquidtite flexible metal conduit B. Conduit and electrical metallic tubing shall be hot dipped galvanized. C. Non-metallic raceways acceptable for use on this project shall be: 1. Rigid nonmetallic conduit (Schedule 40 PVC) 2. Rigid nonmetallic conduit (Schedule 80 PVC). 2.2 WIRING A. All conductors shall be 90 deg C THW or THHN/THWN 600 V copper. No aluminum conductors shall be installed on project. B. All conductors #10 and smaller used for feeder and branch circuits shall be solid conductors. All conductors #8 or larger shall be stranded. C. Connectors shall be wirenuts sized in accordance with the size and number of conductors being connected. All conductors shall be copper. D. Splice and tap connectors shall be compatible with the conductor material and shall have mechanical strength and insulation rating equivalent to conductor.