Site work and paving for a road / highway in Danville, Virginia. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Mill at a width of 24 feet and a depth of 2 inches, tack milled surface with 0.10 - 0.15 gallon per square yard of tack coat, place 2 inches (220 pounds per square yard) of SM-12.5D surface mix asphalt, and reconstruct or remediate shoulders with shoulder maintenance aggregate material no. 25 or 26. Deep milling, tacking, and placement of 2 inches of IM-19.0A intermediate asphalt may be required in areas to be determined and marked by City personnel prior to resurfacing operations. Following paving operations, replace existing pavement line markers and markings with Type B, Class I (thermoplastic) markings. Total length is approximately 3.15 miles (Riverside Drive EB = 1.0 Miles, South Boston Road WB = 2.15 Miles) Submit your bid with proposal guaranty (bid bond, certified check, or cash escrow) equal to at least 5% of the total amount bid. A five percent (5%) bid bond (proposal guaranty) and one hundred percent (100%) payment and performance bonds as detailed in the City of Danville Standard Requirements and Instructions for Bidding or as amended. The City reserves the right to reject any or all bids and to waive any irregularities or informalities in the bidding. The City, in protecting its best interest, reserves the right to reject any or all bids or waive any defects in favor of the City. Any changes, erasures, deletions in the unit or lump sum prices above, modifications in the bid form, or alternate proposals not specified in the bid proposal shall make the proposal irregular and subject to rejection. All quantities listed are estimates only and the City reserves the right to raise, lower, or eliminate any quantity or item and in any case the unit or lump sum prices shall be used in determining partial or final payment.