Renovation of a municipal facility in San Fernando, California. Completed plans call for the renovation of a municipal facility.

From experienced and qualified contractors to perform flooring removal, concrete staining and floor polishing of a City-owned building. The required services and performance conditions are described in the Scope of Work. The City of San Fernando was incorporated in 1911 and is currently organized according to the City Council/City Manager form of government with seven departments, including a Police Department, Public Works Department, and Recreation and Community Services Department. The City employs approximately 134 full-time equivalent positions and operates from a General Fund budget of $22.5 million. The City is a cost conscious provider of outstanding public services to its citizens and local businesses. Questions regarding this RFP must be submitted via email, on or before April 18, 2022, to Rodrigo Mora, Public Works Operations Manager, at rmora@sfcity.org. An addendum with answers to all questions received will be posted on the City's website: https://ci.san-fernando.ca.us/rfps-rfqs-nibsnois/ on April 21, 2022. Listed below are the important dates and times by which the actions noted must be completed. All dates are subject to change. If the Public Works Department finds it necessary to change any of these dates or times prior to the proposal due date, the change will be accomplished by addendum. To be completed in full daily and upon job completion. All clean up performed shall make sure the property is presentable and fully cleaned before work is complete. All ladders down and stacked, tools and equipment stored properly each evening in an acceptable safe location determined by the City of San Fernando and the Site Manager. The City reserves the right to meet or communicate with any PROPOSER to clarify the responsiveness of its proposal and the responsibility of the proposer's organization and its subproposers, in order to ascertain technical acceptability The primary scope of work is for Flooring removal, concrete staining and polishing for a Cityowned Building, which includes, but is not limited to the following: Specifications: Remove Carpet: 1. Power scrape and remove carpet 2. Bag and haul away carpet Concrete Polishing Scope of work: Grind Patch and Polish Concrete Floors. 1. Grind concrete with 30/40 grit metal bond diamonds to remove top surface of floor 2. Patch cracks, voids and divots with ardex sdm 3. Grind with 60/80 grit diamonds to smooth surface and profile floor 4. Hone with 50-200 grit resin bond diamonds 5. Apply lithium densifier to seal and harden concrete surface for polishing 6. Polish with 400-800 grit resin bond diamonds to a highly reflective floor 7. Stain or add floor color to city specifications 8. Seal with Diamatic Flor-Finish Guard for added protection and burnish to set sealer.