Renovation of a swimming pool in Winter Haven, Florida. Completed plans call for the renovation of a swimming pool.

Replace current high pressure sand filters for 50 meter x 25 yard pool. There are currently 3 high pressure sand filters. These are to be replaced with 2 horizontal high pressure sand filters with 80 sq. ft. of filter area per filter. Filters to have single lever backwash systems. This is to also include sand, diaphragms, and all components needed for installing the new filters. Contractor will be responsible for demolition and removal of old filtration systems, as well as installation of new filters and components associated with them. Flow rate for this pool must exceed 1,345 gallons per minute to meet the 4x turnover rate required by the Department of Health. B. Replace current high pressure sand filters for the Dive Pool. There are currently 2 high pressure sand filters. These are to be replaced with 1 single high pressure sand filters with at least 31 sq. ft. of filter area. Filter to have single lever backwash system. This is to also include sand, diaphragms, and all components needs for installing the new filters. Contractor will be responsible for demolition and removal of old filtration systems, as well as installation of new filters and components associated with them. Flow rate for this pool must exceed 574 gallons per minute to meet the 4x turnover rate required by the Department of Health. Replace a total of 3 (2 for 50 Meter Pool, 1 Dive well) recirculation pumps and motors. The motors used shall be VFD controlled, and produce flow ratings that exceed Florida Department of Health regulations for flow rate and turnover of each respective pool. This shall include replacement of strainer basket, pump, volute, impeller, motor, gaskets, seals, and all other components required for installation and operation. Contractor will be responsible for removal of old components, as well as installation of new. D. Replace plumbing from the motor to the filter, and from out of the filter to the heater regulation valve. All plumbing will be replaced with Sch. 40 PVC pipe, as well as proper fittings for Sch. 40 PVC. Contractor will be responsible for measuring lengths of pipe to be replaced during site visit. Contractor shall be responsible for removal of old pipe and fittings, as well as installation of new. E. Replace chemical controller for 50 Meter Pool and Dive Well. Controller to be replaced with equivalent of a BEC Sys5 chemical controller or better.