Site work for a power facility in Mascot, Tennessee. Completed plans call for site work for a power facility.

Q & A deadline: Apr 29, 2022 3:30:00 PM EDT Issue addendum, if required, by 3:30 PM on May 3, 2022. Contractor shall provide ALL necessary equipment, materials and labor to safely load, rig, haul and unload two (2) power transformers and their accessories as directed by KUB: A. REMOVE Power Transformer: 12/16 MVA, 66-13.8 kV, Westinghouse, Serial Number 6532588, KUB Company Number 25647 without oil (e.g. only residual factory oil will be contained in the unit's main and LTC compartment tanks). Refer to KUB Transformer Outline Drawing No. TR-107 Outline 62-A-9781 dated 9-2-1955, as well as, the Nameplate Drawing No. TR-107 dated 9-2-1955 for approximate dimensions and weights. Accessories include: radiators, cooling fans and other ancillary control components. NOTE: KUB will handle the removal and relocation of unit's HV bushings. B. INSTALL Power Transformer: 15/25 MVA, 66-13.8 kV, Kulhman, Serial Number 212736-91-1, KUB Company Number 68558 without oil (e.g. only residual factory oil will be contained in the unit's main and LTC compartment tanks). Refer to KUB ACT1 Transformer Outline Drawing No. TR 167 Outline 212736-3803-401 dated10-14-1991, as well as, the Nameplate Drawing No. TR167 NP 212736-3802-401 for approximate dimensions and weights. Accessories include: radiators, cooling fans and other ancillary control components. NOTE: KUB will handle the removal and relocation of unit's HV bushings. C. The HMT1 REMOVE power transformer and accessory equipment is to be picked up from the HOUSE MOUNTAIN (HM) Substation at 10441 Old Rutledge Pike, Mascot, TN 37806 and delivered to the KUB Hoskins Operations Center (HOC) Transformer Warehouse located at 4505 Middlebrook Pike, Knoxville, TN 37921. D. The T1 INSTALL power transformer and accessory equipment is to be picked up from the KUB HOC Transformer Warehouse and delivered to the HM substation