Renovation of a municipal facility in Millersville, Maryland. Completed plans call for the renovation of a municipal facility.

The Work includes the following major items: Replace the existing three roof top units, replace the existing two chillers and replace the existing two chilled water pumps as shown on the drawings. Below is the purpose of this project: a. Replace the existing three roof top units b. Replace the existing two chillers c. Replace the existing two chilled water pumps The Contractor shall provide all required submittals to the Owner and Architect within forty-five (45) calendar days after Contract Award. Total Project: Should the Work not be performed on or before the times stated, there will be deducted from the Contract Balance the sum of one thousand dollars ($1,000.00) per consecutive calendar days, as Liquidated Damages, but not as a penalty, for each day's delay after expiration of such period, and until final completion of the Work and its acceptance by the Owner. Plus the contractor will be held responsible for additional extended general conditions, consumables, and direct labor costs to the Third Party Inspectors and the Architect for work and re-inspections required until the Contract Work is determined to be acceptable by the Owner. Completion of Punchlist Items: Should the Contractor fail to correct punchlist items within the 15 day period (beginning the date of the receipt of the list) there will be deducted from the Contract Balance the sum of fifty dollars ($50.00) per item per consecutive calendar days, as Liquidated Damages, but not as a penalty, for each day's delay after expiration of such period, and until final completion of the Work and its acceptance by the Owner. The cost range for the Project is: $ $500,000 to $1,000,000. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.