Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
Renovation of an educational facility in Charlotte, North Carolina. Completed plans call for the renovation of a educational facility.
**As of February 22, 2023, this project has not yet been awarded. A timeline for award has not yet been established.** Code No. 42126, Item No. 320 Furnishing of labor, material and equipment entering into the construction of: Reese Building UNC Charlotte Charlotte, North Carolina. Project consists of roof coating on Reese Building. 1. Friday Building - 9209 Mary Alexander Rd., Charlotte, NC 28262 2. Reese Building - 9035 University Rd., Charlotte, NC 28262 Please note that any bids delivered to the UNC Charlotte Facilities Management, Capital Projects must be received by 8:00 a.m. on bid day. Visitor parking is available in Lot 26 in front of the Facilities Management and Police and Public Safety (FMPPS) building (#55 on the campus map) Bidders' questions will be entertained in writing until 5:00 p.m. on December 23, 2022. Address all questions to the Engineer, Vu The Nguyen, EI, RBEC, Terracon Consultants, Inc. (vu.nguyen@terracon.com). Emails shall have subject line as follows: UNC Charlotte Reese Building; (your company name); BIDDER QUESTION." Include your company name, contact information, email addresses, and phone numbers in the body of your email. Cc: Vicky.Neal@terracon.com The bidder shall include with the bid proposal the form Identification of Minority Business Participation identifying the minority business participation it will use on the project and shall include either Affidavit A or Affidavit B as applicable. Forms and instructions are included within the Proposal Form in the bid documents. Failure to complete these forms is grounds for rejection of the bid. (GS143-128.2c Effective 1/1/2002.) Plumbing, Mechanical and Electrical prime contractors are notified that General Statutes Chapter 87, Articles 2 & 4, will be observed in receiving and awarding plumbing, mechanical and electrical contracts. Each proposal shall be accompanied by a cash deposit or a certified check drawn on some bank or trust company, insured by the Federal Deposit Insurance Corporation, of an amount equal to not less than five percent (5%) of the proposal, or in lieu thereof a bidder may offer a bid bond of five percent (5%) of the bid executed by a surety company licensed under the laws of North Carolina to execute the contract in accordance with the bid bond. Said deposit shall be retained by the owner as liquidated damages in event of failure of the successful bidder to execute the contract within ten days after the award or to give satisfactory surety as required by law. A performance bond and a payment bond will be required for one hundred percent (100%) of the contract price. Payment will be made based on ninety-five percent (95%) of monthly estimates and final payment made upon completion and acceptance of work. No bid may be withdrawn after the scheduled closing time for the receipt of bids for a period of 30 days. The owner reserves the right to reject any or all bids and to waive informalities. Bidders who will not attend the bid opening need to ensure their sealed bids are delivered no later than deadline to the following: Mailed and Hand Delivered Proposals: UNC Charlotte Attention: Ms. Jeanine Bachtel Director of Planning, Design and Construction Facilities Management - Capital Projects 9151 Cameron Blvd. Charlotte, North Carolina 28223 Work under the Friday Building Base Bid generally includes the following: 1. Remove existing ballast, EPDM membrane, flashings and metal flashings and discard. Install new 2.6 inch polyisocyanurate insulation, 0.5 inch coverboard, and PVC membrane coping cap and all flashings and associated miscellaneous work as specified therein. 2. Existing insulation shall remain in place except where wet/damaged, and replaced under unit price allowance.Work under the Reese Building Base Bid generally includes the following: 1. Existing system to remain. Coat existing system with a reinforced coating system. Replace existing coping cap with new. 2. Existing insulation shall remain in place except where wet/damaged, and replaced under unit price allowance. 3. Installation of masonry sealer at walls above Area B.
Bid Results
Educational
$715,000.00
Public - State/Provincial
Renovation
Trades Specified
Division 00 - Lorem Ipsum
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
Find More Local Projects
Within 75 Miles of This Project
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
January 24, 2023
May 19, 2023
Multiple Locations, Charlotte, NC
Related To This Project
Charlotte, NC
Bid Date: Dec 14 2022
Charlotte, NC
--
Charlotte, NC
--
Charlotte, NC
--
Charlotte, NC
Bid Date: Dec 22 2021
Charlotte, NC
Bid Date: Jan 11 2022
Charlotte, NC
Bid Date: Sep 23 2020
Charlotte, NC
Bid Date: Jan 27 2023
Charlotte, NC
Bid Date: Dec 13 2022
Charlotte, NC
Bid Date: Dec 16 2022
Charlotte, NC
--
Charlotte, NC
Bid Date: Aug 15 2019
Charlotte, NC
Bid Date: Jun 27 2019
Charlotte, NC
--
Recently Viewed
--
--
--
--
--
--
--
--
--
--
The data you need to build the relationships you want. Try it free.
Sign up now to get free company and project data. No payment required.
Get the right
data with Project Intelligence
Project Shared
with
example@example.com
Choose what you would like to do.
Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.
What is your business type?
We have a wide variety of products that are purpose built for certain business types.