This is a service / maintenance or supply contract in Los Angeles, California. Contact the soliciting agency for additional information.

Bids are requested for the annual requirements of the los angeles harbor department for fitness equipment preventative maintenance, incidental labor and repair, to be furnished and delivered as may be required during a one-year period from effective date of the agreement. Provide on-site preventative maintenance and repair service for physical fitness equipment owned by the harbor department at various locations within the harbor area. Preventative maintenance shall consist of performing the following for the specific types of equipment at each location: Cross-trainers Check all resistance components Check electronic components Check and lubricate drive belt Calibrate to manufacturer's specifications Test overall operation of unit Rowing machines Check and clean control board functions Check resistance system (minimum to maximum) Check pivot points - clean and lubricate Clean and lubricate track and chain Calibrate to manufacturer's specifications Test overall operation of unit Stair climbers Check all resistance components Check electronic components Inspect step drive components - clean and lubricate Inspect all bearings, bolts and miscellaneous hardware Calibrate to manufacturer's specifications Test overall operation of unit Stationary bikes Check control board functions Inspect alternator brushes Sand fly wheel and inspect tension belt for wear Clean and lubricate chain Inspect drive belt chain tension system (minimum to maximum) Inspect all bearings, freewheel sprocket, bolts/screws and chain/drive sprocket Check speed assembly Test overall operation of unit Treadmills Inspect rear roller Inspect rear brace and all welds Align running belt and lubricate deck surface Inspect lower electronics and adjust when necessary Clean and vacuum drive motor, air intakes, and fans Inspect drive belt for wear and proper tension Calibrate to manufacturer's specifications Test overall operation of unit Strength equipment (weight machines) Inspect all cables for wear Lubricate guide rods, carriage assembly, pulleys and miscellaneous hardware Test overall operation of unit