Renovation of an educational facility in Jackson, Michigan. Completed plans call for the renovation of an educational facility.

For Northwest High School Athletic Building Upgrades The project scope of work is a new gable roof, wood trusses, plywood decking, steel roofing, steel siding, and select windows on the Northwest Athletics building located at Northwest High School. The scope of work includes demolition, structural and architectural. Each and every bid shall be accompanied by a sworn and notarized statement disclosing any familial relationship that exists between the owner or any employee of the firm submitting the bid and Northwest Community Schools All bids submitted shall be from a prime bidder only and shall include all subcontractor costs for scopes identified in the contract documents. This project does not require prevailing wages. Bids shall be executed on Bid Form provided. Each proposal must be accompanied by a satisfactory certified check, money order, or bid bond payable to Northwest Community Schools for not less than five (5%) percent of the amount of the bid and delivered in a sealed envelope bearing the bidders name, address, and project identification. Successful bidder(s) will be awarded by AIA A101-2017, Standard Form of Agreement Between Owner and Contractor, as modified, issued by the Owner following action by Northwest Community Schools. The Owner reserves the right to accept or reject any or all bids, to waive any irregularities in biding and to refrain from accepting or rejecting any bids for a period of thirty (30) days after the bid opening. 1) REMOVE AND DISPOSE OF EXISTING EXTERIOR MANSURD ROOF 6) 16" OVER HANG ON EVE SIDES. 12" OVERHANG ON BOTH GABLES WITH 6' FASCIA BOARD 7) VENTED ALUMINUM SOFFIT ON BOTH EVES WITH SOLID ALUMINUM SOFFIT ON BOTH GABLES 8) 6" ALUMINUM FASCIA ON ALL EVES AND GABLES 9) TRUSS SYSTEM TO BE SHEETED WITH %" PLYWOOD 10) ICE AND WATER SHIELD TO BE INSTALLED OVER THE %" PLYWOOD 11) METAL POLE BUILDING STEEL ON ROOF, METAL RAKE ON GABLE ENDS, METAL ROOF CAP 14) EXTERIOR WALLS TO BE COVERED WITH METAL POLE BUILDING STEEL 15) GAS LINE ON THE NORTH SIDE TO BE LOOSENED FOR SIDING AND RE-ATTACHED 16) 2 EXISTING BATHROOM VENTS TO BE EXTENDED 16" ABOVE FINISHED METAL ROOF 17) ALL MATERIALS AND DEBRIS ARE TO BE REMOVED FROM THE SITE BY THE CONTRACTOR 2) ADD 1 ADDITIONAL 2 X 6 TO THE INTERIOR SIDE ON TOP OF THE EXISTING NORTH AND SOUTH WALLS FOR ADDITIONAL ROOF SUPPORT. 4) ADD 2 - 2 X 6 ON THE FLAT DOWN THE CENTER OF THE BUILDING FOR ADDITIONAL TRUSS SUPPORT AND NAILING 5) TRUSS TO BE 4:12 PITCH AND 24" OC NAILED TO THE 2 X 6 ON THE FLAT AND ALSO SECURED WITH HURRICANE CLIPS