Housing authority of the city of lincoln will accept quotes on a single, firm, fixed-price contract to include all work for lincoln housing authority p-30 furnace replacement according to the drawings and specifications prepared bob goggins of lincoln housing authority, and described in general as follows: remove and replace 30 existing furnaces at scattered sites in lincoln, nebraska. All quotes shall remain in effect and may not be modified, withdrawn or canceled for a period of 30 calendar days after the scheduled closing time for the receipt of quotes.
The Owner reserves the right to reject any or all quotes and to waive any informalities or irregularity in any quote received. Minimum wage provisions of the Davis-Bacon act will be enforced on this project. Bidders are advised to carefully study the Davis-Bacon requirements as described in Specifications Section 01 10 61 HUD Requirements. Construction time may be a consideration in the award of the Bid. Quality and craftsmanship are important to the Owner and may be a consideration in the award of the Bid. Contractor shall bid only the highest quality installation of the materials specified. Submittals for approval of proposed substitutions must be received by the Architect not later than 7 full calendar days prior to the bid date. See Section 01 60 01 for details of submittal requirements. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com. Work included: This section includes specifications for cleaning duct
and HVAC systems on this project. Including the following:
1) Air outlets and inlets (registers, grilles, and diffusers);
2) Furnace fans, including fan housings, scrolls, blades or vanes, shafts,
baffles, dampers, and drive assemblies;
3) Furnaces and related ductwork;
4) Air-conditioner coils, condensate pans, and related components;
5) Return-air ducts;
6) Supply-air ducts, dampers, and turning vanes; *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.
.webp)
