Site work and paving for a sidewalk / parking lot in Milwaukee, Wisconsin. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

As of 6/14/2022 no award has been made. A timeline for the award has not yet been established. Complete removal and repave o Excavate existing asphalt and haul material off site. o Furnish and install 1.5" compacted thickness hot mix asphalt. o Furnish and install 1" to 2" of crushed aggregate base course, as needed, to maintain existing grades. o Fine grade, water and compact crushed aggregate base course. o Machine pave a total asphalt thickness of 4" constructed in two lifts, with the first lift consisting of paving 2.5" compacted hot mix asphalt using Wl D.O.T. gradation #2 binder course materials, followed by an application of tack coat, and then pave the second lift of 1.5" compacted hot mix asphalt using Wl D.O.T. gradation #4 surface course material. Sealcoat Entire Site o Two Coat Commercial Sealcoating Procedure o Thoroughly clean the pavement surface of all dirt, debris and vegetation, using truck mounted power sweepers or air blowers. Soil sterilant shall be applied as required. o Prime all petroleum stains with "Petro bond" (acrylic oil spot primer) bonding agent. Areas of excessive oil buildup will be burned, as required. o Major cracks, %" and wider will be filled with W.R. Meadows Hi Spec, ASTM3405 (Hi Spec 3405) Polymeric Joint Sealer. (Crack filling is not a substitution for the repair of "Alligator" or "Spider Web" failure areas.) o Apply two coats of commercial grade asphalt emulsion, (Pave Shield, Armguard, Seal master), that provides a high-performance protective coating for sealing asphalt pavement. Approved silica sand shall be added to the sealer at a rate of 6-7 pounds per gallon to enhance skid resistance and coating durability. o Re-stripe the existing parking lot layout. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.