**As of July 08, 2022, project was awarded to Newport Construction Corporation but awarded amount is not available.** Estimated Cost $65,000. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Perform asphalt/concrete excavation by cold planer on town owned asphalt pavement
The contractor shall be responsible for excavating asphalt concrete pavement by cold planer. Depth of planing shall average 2 inches. The cold planer shall be equipped with a cutter drum at least 72 inches wide with an elevating device capable of loading milled material directly into trucks while operating and with dust control system capable of complying with environmental air quality standards. The contractor will be required to supply auxiliary milling equipment to clean up work along the curbs
and around castings. Work areas shall be left clean and free from debris at the end of each workday. The use of planing equipment mounted on pneumatic tires will be permitted only for clean up work or in areas less than 10 feet wide The contractor will be responsible for damage to existing castings resulting from his operation unless such castings have previously been paved over, are not visible on the surface, and have not been marked out in the field by the Highway personnel.The Town of Dunstable reserves the right to salvage any material such as granite, brick, or millings.
MassDOT prequalification of contractors with the class ofwork as, Pavement- Milling and
Cold Planing, for the project with an estimated value of $ 62,500 first year with possible 2
additional 12 month options for project total of $ 187, 500.
Contract Time: The period for this contract is expected to be for a period ofJune 15, 2022 to June 30,
2023 with an option to renew for an additional two years
.webp)
