This is a service / maintenance or supply contract in Raleigh, North Carolina. Contact the soliciting agency for additional information.

The NC Department of Public Safety invites engineering design firms experienced in performing Arc Flash Studies to submit qualifications for providing Arc Flash Modeling and associated electrical distribution equipment labeling. Provide electrical engineering services to perform an Engineered Arc Flash Study for NC Department of Public Safety. These services will be performed across all campus buildings, and the owner's medium voltage distribution system (where present). The attached List of Campuses identifies the approximate magnitude of electrical distribution. Coordinate with the Utility to obtain the distribution protective information to be incorporated into the Model. During the distribution survey, the Professional Designer shall field collect and document As-Built information (e.g. protective devices/ settings, conductor types/ sizes/ lengths, raceways, etc.) to develop an As-Built single-line diagram of each building to be used in developing the Power System Studies of each building to produce an Arc Flash Risk Assessment report in accordance with: NFPA 70E and IEEE 1584 for calculations and label information. Total Project Budget $2,976,250. The Professional Designer shall be responsible for providing the services of a qualified electrician who is trained in identifying arc flash hazard and will use proper PPE to remove panel covers where required to obtain the information necessary to complete the arc flash model. Provide the single-line diagrams for each of the buildings to be used in the Power System Studies for owner review and approval prior to performing the studies. Provide preliminary Power System Studies and electronic Arc Flash and Shock Hazard warning labels for the Agencies review and approval prior to printing physical labels. Provide mitigation recommendations for the Agencies consideration to reduce the arc flash incident energy where possible. Incorporate Agencies review comments from the preliminary Power System Studies and provide final Power System Studies and Arc Flash Risk Assessment report. Provide and Install Agencies approved Arc Flash warning labels on each equipment evaluated. Provide electronic copy of each of the system models to the Agency. Due to the large volume of work over the large geographic territory, NCDPS intends to select and contract with multiple design firms. This will allow for the proposed work to be completed within a twoyear time-period. In order to offer architectural, engineering, or landscape architectural services in response to this solicitation, the proposing firm must be properly licensed to practice Architecture, Engineering, or Landscape Architecture in the State of North Carolina. More information on the North Carolina state boards may be found at the websites.