Renovation of a transportation facility in Ghent, New York. Completed plans call for the renovation of a transportation facility.

Columbia County Columbia County Department of Public Works Engineering Department invites sealed bids for furnishing all labor and materials necessary for the replacement of the existing building windows and partial interior finishes serving the maintenance hangar at the Columbia County Airport facility. The installation will include all required materials, tools, labor, new equipment; and expertise, under the requirements to remove and dispose of the existing 2nd floor windows and selective demolition of some interior finishes and the installation of new windows, insulation and interior finishes as required. The work shall be substantially completed within 120 calendar days of the date of the Notice to Proceed. All proposals shall be made and received upon the following conditions, which are more fully set forth in the bid documents: 1. Only such proposals as are made and filed upon the forms available in the Bid Documents will be accepted. 2. Proposals are to be enclosed in a sealed envelope. 3. 4. Pursuant to the provisions of GML 105, no bids may be withdrawn unless no contract is awarded for more than 45 days after the opening thereof. 5. Upon acceptance of the bid, if the successful bidder fails to enter into a contract pursuant to the requirements of the County or fails to give the further security prescribed in this notice within the time noted herein, then the bid security deposited as aforesaid, and the moneys standing to the credit of the same shall be forfeited to the County as liquidated damages and not as a penalty and the County Treasurer shall collect the same or enforce the payment of the bond for the benefit of the County. 6. All bids shall contain the non-collusion certificate in a form meeting the requirements of GML 103-d. The County of Columbia reserves the right, in its discretion, to waive technical noncompliance or irregularities that are not material or substantial, and to reject all bids and to rebid the project Remove and replace the existing windows, header and jamb returns, and sills. New windows to match existing size and type. b. Remove and replace the existing interior gypsum board and insulation as follows: i. Exterior Wall: Selective demolition and replacement of the existing finishes and insulation form the ceiling line to sill height of the windows along the exterior wall. The existing finishes below the sill line shall remain. ii. Ceiling: Selective demolition and replacement of the existing finishes and insulation form the exterior wall line to a point 5 feet from the interior wall line parallel to the exterior wall.