Renovation of a transportation facility in Hope Hull, Alabama. Completed plans call for the renovation of a transportation facility.

Plans and specifications are for viewing purposes only and in order to be considered an official bidder contractors must obtain plans and specifications from Goodwyn Mills & Cawood Inc. PLEASE NOTE: The estimated value listed for this project is for searchability purposes only and does not reflect the actual construction budget as determined by the owner. It should not be used for estimation purposes at this time. Work includes, but is not limited to, removal of existing roofing components and replacement with new roof system: with Bid Item 1: 90 mil TPO System as indicated; Bid Item 2: Modified Bitumen System as indicated; Bid Item 3: Lightning Protection Certification as indicated; Bid Item 4: Four (4) Metal Roof Repairs at Hangar Locations as indicated; Coordination of the entire project, and all related work, as indicated in the Bid and Contract Documents. Other sets for general contractors, and sets for subs and dealers, may be obtained with the same deposit, which will be refunded as above, less cost of printing, reproduction, handling and distribution, which is estimated to be the same as the deposit amount. Partial sets will not be available. To expedite distribution of bid documents email requests with a copy of the deposit check(s) referencing this project to Rachel.Mayer@gmcnetwork.com. Hard copy deposit checks referencing this project should be mailed to Goodwyn Mills Cawood, LLC; Attn: Rachel Mayer; PO Box 242128; Montgomery, AL 36124; Fax No.: (334) 272-1566. Certified check or bid bond payable to the Owner, for not less than five percent (5%) of amount of bid, but in no event more than $10,000, must accompany each proposal. Workmen's Compensation, extended fire and tornado insurance, public liability and property damage insurance, performance and payment bond; and Builders Risk insurance will be required. Insurance in compliance with requirements, will be required at the signing of the Contract. AIA General Conditions, AIA Document A-201 "General Conditions of Contract for Construction", 1997 Edition, issued by the American Institute of Architects is part of the specifications for this project, except as modified by the Project Manual. Bids must be submitted on proposal forms furnished by the Architect or copies thereof. All bidders bidding in amounts exceeding that established by the State Licensing Board for General Contractors must be licensed under the Provision of Title 34, Chapter 8, Code of Alabama, 1975, as amended, and must show such evidence of license before bidding or bid will not be received or considered by Architect or Owner; The bidder shall show such evidence by clearly displaying their current license number on the outside of the sealed envelope in which the proposal is delivered; Bidders must also include their current license number on the Proposal Form. No bid may be withdrawn after the scheduled closing time for receipt of bids for a period of SIXTY (60) days. Additional qualifications and requirements for invited General Contractor Bidders and separate Subcontractors and Manufacturers are indicated in the Bid and Contract Documents. The Owner reserves the right to reject any or all proposals and to waive technical errors if, in their judgment, the best interests of the Owner will thereby be promoted.