This is a service / maintenance or supply contract in Watertown, Connecticut. Contact the soliciting agency for additional information.

Sources Sought Notice for Design-Build Construction, Nothern Region, in Support of the Defense Health Agency (DHA). This is a Market Research and Sources Sought Notice only. No award will result from this Sources Sought Notice. There is no solicitation available at this time; therefore, do not request a copy of the solicitation. If a solicitation is released, it will be synopsized in accordance with the Federal Acquisition Regulation and its supplements. It is the contractor's responsibility to monitor the Government Point of Entry for the release of any solicitation. *Northern Region MATOC - estimated value of this potential acquisition is a $249,000,000.00 capacity. Sources Sought Number: W9127822R0017 Classification: Y1DA (Construction of Hospitals and Infirmaries) NACIS: 236220 Location/Area: Two Phase Design-Build and Construction, Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Task Order Contracts in Support of Defense Health Agency (DHA), Northern Region Subject: Northern Region - Two Phase Design-Build and Construction IDIQ MATOC in Support of DHA Sources Sought Notice / Market Research for information on capability and availability of potential contractors interested in proposing on Firm-Fixed-Price Contracts to provide designbuild, construction and repair in support of DHA Medical Facilities in the Northern Region of the United States of America. The Mobile Regional Contracting Center proposes to utilize a diverse mix of contractors via Multiple Award Task Order Contracts (MATOCs). A determination regarding the potential small business reserves will be based on the information and interest received as a result of this notice. The intent of the design-build construction contracts are to provide quick response for performing repair and minor construction relating, but not limited, to the architectural, mechanical, electrical, instrumentation, security and safety areas of military healthcare and research laboratory facilities in a cost-effective manner. Work will vary from site to site and will require extensive knowledge of the functional operation of medical facilities, including equipment, facility support systems, and building structures. Since the facilities will typically be in full operation, the contractor will be required to minimize interference with the daily operation of the facilities and will be required to implement infection control processes and to comply with Joint Commission requirements for construction work in occupied medical facilities. Certain facilities may require compliance with American Association for Accreditation of Laboratory Animal Care (AAALAC). Work may range from reconfiguration of a single room or repair of a single utility system component to renovation of a hospital wing to include both repair of failed and failing systems and components, and minor construction of new systems and components. Key personnel, to include on-site supervisors, are required to hold an American Society of Healthcare Engineering construction certificate. For the purpose of this procurement an active medical facility is defined as a full functional facility with patients. RESPONSE INSTRUCTIONS Responses are requested with the following information: 1. Contractor's name, address, points of contact with telephone numbers and e-mail addresses. 2. Business size/classification (to include any designations such as Small Business, HUBZone, Section 8(a) contractor, Service Disabled Veteran owned Small Business, Small Disadvantaged Business, Women Owned Small Business, etc.) shall be indicated on the first page of submission. Offeror's bonding capability (construction bonding level per contract/project and aggregate construction bonding level, both expressed in dollars). 3. Documentation should be submitted with the following considerations: a. Describe your capability and experience to provide design-build and construction services at an active medical facility and/or laboratory. Offerors should describe their capability to perform work that includes architectural, mechanical, electrical, and instrumentation. b. Capability to meet the Joint Commission requirements at military installations. c. Capability to perform in the Northern Region. The following shall be included for project information: d. No more than five (5) projects that are at least 50% complete within the past five (5) years that demonstrate capability based on the criteria listed above in section 3. e. Project information is not to exceed 1 page, should include title, location, general description, dollar value, and agency/Government entity. f. Submitted projects should be between $500,000 to $5,000,000.00. 4. The above requested information shall not exceed a total of eight (8) pages on 8.5" x 11" paper, 12-point Times New Roman font, with a minimum of one (1) inch margins all around. Please do not provide standard marketing brochures or catalogs. Responses will be evaluated on the basis of demonstrated functional capability. Responses are due no later than 6 July 2022, 2:00 p.m. CST. Responses received after this date and time may not be reviewed. Responses shall be submitted via email to Ms. Rhonda Archie, Contract Specialist, at larhonda.m.archie@usace.army.mil, and ct-cproposals-medcom@usace.army.mil. In the subject line of your email state: Response to W9127822R0017-DB and Construction MATOC Sources Sought Notice. No responses will be accepted by mail or fax. Submittals will not be returned. Telephonic responses will not be honored. The following are the places of performance for the subject requirement: o Northern Region - Connecticut, Delaware, Illinois, Indiana, Maine, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington D.C. The anticipated period of performance is five-year ordering period The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.