This is a service / maintenance or supply contract in Philadelphia, Pennsylvania. Contact the soliciting agency for additional information.

The api-5l a53, grade b is an accepted alternative for the api-5l x42 as long as the pipe is made in the u.S.A. Mill certifications must accompany all shipments. Tally sheets must be supplied for all pipe, detailing footage per piece of pipe. Bare pipe (not being coated) - for bare pipe, paint stencil on the inside and outside surfaces starting at a point between 12 inch and 18 inch from both ends. Manufacturer api license number (name is optional) Api monogram Date of manufacture and location of mill Pipe size, wall thickness, weight/ft and grade Product specification level (psl 1or psl 2) Process of manufacture (erw, dsaw, etc) Heat treatment symbol (hs,hn,etc.) and heat number Test pressure (psi) The successful vendor must email (procurement@pgworks.Com) and (rachel.Crusco@pgworks.Com) mtr and tally sheets prior to shipment for pgw to review and approve. Note: actual material test reports and a certificate of compliance are required. Certifications showing only typical properties are not acceptable. The awarded vendor will invoice once pgw assumes ownership of the material. Pgw will assume ownership once the material is requested to be released for coating. If the delivery is outside of the approved quantity, delivery will be rejected if the difference in quantity is not approved in writing by pgw in advance. The bidder will be responsible for paying any additional costs imposed by liberty upon delivery from the mill including sandblasting, cleaning, and handling.