Renovation of a municipal facility in West Haven, Utah. Completed plans call for the renovation of a municipal facility.

The purpose of this request for proposal is to enter into a contract with a qualified firm to replace, repair, and/or engineer steel plate on the transfer station tipping floor. It is anticipated that this RFP may result in a contract award to a single contract award. The Solid Waste Transfer Station, located at 867 Wilson Ln, West Haven, UT 84401, utilizes a tipping floor to load waste to be hauled to the proper waste facility. The waste is loaded at the south end of the facility with a scale and truck loading ramp 20 feet below. The waste is scoped by a front loader and dumped into the loading trench. A track-hoe with a compacting head, compacts the waste in the trailers below. On the top facing surface of the trench is plate steel that runs the length of the trench. There is a 1/2 inch rubber curtain that attaches below with steel brackets. The curtain is intended to direct the waste into the trailer. This has become a costly repair due to the rubber curtain taring and having to be replaced. With this RFP it is the hopes that a design can be made that utilizes a steel plate with an angle bent into it that would take the place of this curtain. And, create a whole solid piece that will protect the concrete edge and surface. With this RFP it is the hopes that a design can be made that utilizes a steel plate with an angle bent into it that would take the place of this curtain. And, create a whole solid piece that will protect the concrete edge and surface. The Transfer Station is looking to the expert's proposals of design ideas and/or solutions to reduce the costs associated with repair and replacement Question Submission Close Date 7/18/2022 12:00 PM MDT