This is a service / maintenance or supply contract in Jacksonville, Florida. Contact the soliciting agency for additional information.

1.1 The purpose of this specification is to provide the technical requirements and scope of work to support procurement of: 1.1.1 Drone-based flying transmission system damage assessments in case of a tropical storm, hurricane or other high wind event in JEA's service territory on an as-requested basis. 1.1.2 Drone-based flying comprehensive circuit inspections of JEA's transmission circuits energized at 230, 138 and 69 kV on an as-scheduled basis. 1.1.3 The annual work referenced above is subject to change. There is no guaranteed annual work or minimum work amount to be performed under this contract. 1.1.4 The listed scope of work shall be paid based upon labor, equipment, material, mobilization/demobilization, reimbursable and standby charge rates as bid by the Company. 1.1.5 JEA shall pay the Contractors hourly labor and equipment expenses for JEA requested standby and/or weather delays once mobilized. 1.1.6 The Company shall provide drone(s) equipped to perform the assigned task, FAA licensed drone pilot, observer/camera or video equipment operator and ancillary equipment as specified in these documents. The company shall request permission to fly in controlled airspaces. All questions shall be submitted in writing to the JEA Buyer listed below at least three (3) business days prior to the Bid opening date. Questions not received three (3) days prior to the Bid opening date will not be answered. For All Questions: Buyer: Jason Behr Email: behrjv@jea.com The Method of Contractor Selection has not been determined at this time.