Renovation of a service station / car wash facility in Portland, Maine. Working plans call for the renovation of a service station / car wash facility.

**As of August 25, 2022, project is on hold. No definite date for the rebid. Greater Portland Transit District (GPM) is accepting proposals for a BUS WASH REHABILITATION project Greater Portland Transit District (GPM) is accepting electronic proposals for a bus wash rehabilitation project at its location of 114 St. John Street Portland, Maine. GPM expects the work to be completed by November 2022. Detailed listing of the specifications of the current bus wash system in use, and desired scope of work are included in the RFP document. GPM receives funding from the Federal Transit Administration and as such is required to follow federal procurement regulations and to require its consultants and contractors to understand and adhere to those requirements. FTA requirements are conditions for this RFP and contract, and are included in the RFP document. METRO encourages participation by small, women owned, minority, and disadvantaged businesses and supports non-discriminatory, equal-opportunity employment by its contractors. All general questions regarding the RFP process or legal submissions as well as Technical Questions regarding the RFP, etc. shall be made to Shelly Brooks, Finance Director. Contact Shelly Brooks via email at sbrooks@gpmetro.org. All email requests must reference the below listed RFP and include the name of the Respondent/ Respondent's Firm, Firm address, Telephone and Facsimile numbers, and Respondent's email address. Scope of Project The contractor shall provide and install the following scope for this rehabilitation project: o Replace existing nozzles o Replace existing motors for brushes o Replace brushes (seeking softer material options) o Replace brush switches o Replace brush shafts o Replace brush shaft bearings (Both top and bottom) o Replace any worn out rails and hardware o Replace pre-soak mat o Install an undercarriage wash o Install wheel spinners/wheel cleaners (high pressure) o Install boost pump (120 psi range) o Electrical upgrade (If necessary, with boost pump provided)