Site work and paving for a road / highway in Macon, Georgia. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Micro Mill and Inlay, Restripe, install RPMs Location/County - MP 166.48 to 169.92-- Bibb Route - SR 401 ( I-75) NB & SB Deadline for Written Questions from Contractors - 12/28/2022 2:00 PM Responses to Written Questions to Contractors - 12/29/2022 5:00 PM This solicitation is being conducted by the Georgia Department of Transportation under its authority to procure services ancillary to the construction and maintenance of a public road (as defined in O.C.G.A 32-1-3 (24) as provided for in O.C.G.A 32-2-61 (c) and (d) (1) (D). Only contractors deemed as Qualified Contractors to provide "Pavement Preservation and Maintenance Services" during the prequalification process having an MSA agreement beginning with (48400-410-0000034480) are eligible to participate in this Invitation to Bid (ITB) / Request for Quote (RFQ). Through this ITB/RFQ the Georgia Department of Transportation (hereinafter, "the State Entity, Department, Agency, or GDOT") is seeking bids for Pavement Preservation and Maintenance Services. All respondents to this ITB/RFQ are subject to same terms and conditions of the MMSA 48400-410-0000034480, all respondents to this ITB/RFQ are subject to same terms and conditions of the RFQC 48400-410-0000033480, subsequent awarded contract, and the Invitation to Bid (ITB) / Request for Quote (RFQ) Form, and are cautioned to completely review the entire ITB/RFQ and follow instructions carefully. The Department reserves the right to modify existing provisions or include additional provisions, which are not currently addressed herein and further reserves the right to reject any or all bids, and to waive technicalities and in-formalities at its discretion. Scope of Work to be Performed The Contractor will be required to perform prep work, removal, installation and cleanup for Pavement Preservation and Maintenance Services defined in this ITB. The majority of the work will occur on the Interstate and State Route system. The Contractor shall supply labor, equipment, tools, means of transportation, traffic control, and incidentals to perform work in accordance to specifications, and to ensure a safe work environment for employees and the traveling public within the time schedule specified. 1. Scope Work under this ITB consists of furnishing all labor, materials, tools, equipment, means of transportation, and incidentals necessary to perform the services. Contractor must furnish equipment in good operating condition and operated by properly trained and qualified personnel. The Contractor must make a good faith effort to furnish the Department the fully operational equipment needed to perform Pavement Preservation and Maintenance Services at such time, and at such location(s) as directed by the Engineer. Prior to start of work, Contractor must inspect equipment to ensure the equipment is fully operational for the performance of its intended purpose. The Contractor will also be responsible for any traffic control, licenses, and permits required to satisfy the duties required herein