Renovation of a water / sewer project in Round Rock, Texas. Completed plans call for the renovation of a water / sewer project.

INTRODUCTION: The City of Round Rock, herein after “the City” seeks a bid from firms experienced in glazing and storefront window removal and installation. The City’s water treatment plant, Phase 3 and 4 buildings, require complete replacement of all windows and storefront windows. 2. GLAZING AND STOREFRONT WINDOWS: A. Contractor shall provide all labor, supplies, equipment, and materials required to satisfactorily remove and reinstall all glazing and storefront. B. Storefront will include removal and replacement of doors and hardware. C. All materials shall be in new and unused condition unless otherwise agreed upon by the City. D. A list of materials and manufacturers shall be provided to the City POC for approval prior to any work being performed. E. All materials and installations shall be in accordance with Attachment E – Phase 3 Door and Window Schedules, Attachment F – Phase 3 Elevations, Attachment G – Phase 4 Door and Window Schedules, and Attachment H – Phase 4 Elevations. F. All glass shall be tinted or transitional with Ultraviolet (UV) blocking capabilities preferred. G. All waterproofing must be removed and reinstalled. H. A water test shall be performed on all windows and storefront at the completion of the project with a City representative present. If there are any failures, the contractor shall be responsible for immediate repairs. 3. SERVICE REQUIREMENTS: A. Services shall be performed at the following location: Water Treatment Plant (Phase 3 and Phase 4) 5200 N IH 35 Round Rock, Texas 78665 B. The Contractor shall be responsible for all inspections and permits that may be required for the completion of this project. C. Services shall be performed during normal business hours 7:00AM – 5:00PM unless otherwise agreed upon by the City POC. D. Successful Respondent shall provide at minimum a one (1) year warranty on all workmanship and parts including but not limited to manufacturer's warranty, workmanship defects, and installation. All warranty work shall be completed within five (5) working days from notice of defect.