Site work and paving for a road / highway in Chadron, Nebraska. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Award Details Contract Award Date: Sep 26, 2022 Contract Award Number: 140LT22C0085 Task/Delivery Order Number: Contractor Awarded Unique Entity ID: GJJ7UAGPMYX3 Contractor Awarded Name: Dakota Prairie Landscapes, L.L.C. Contractor Awarded Address: New Underwood, SD 57761-6109 USA Base and All Options Value (Total Contract Value): $94570.80 PROJECT LOCATON Nebraska National Forests and Grasslands Pine Ridge Ranger District 125 N Main St Chadron, Nebraska 69337 This project is located within the Nebraska National Forests and Grasslands, Pine Ridge Ranger District. Access to Hilltop Road 717 is to travel south from Chadron on Highway 385 for approximately 11 miles to Hilltop Road 717 on left, just south of the Pine Ridge Job Corps. Beginning of project is at the intersection with Highway 385. MAGNITUDE OF CONSTRUCTION PROJECT Between $100,000 to $250,000 (Reference FAR Part 36.204 respective magnitude Solicitation No: 1240LT22Q0063 Project Name: 2021 Pine Ridge Ranger District Hilltop NFSR 717 Forest: Nebraska National Forest Page 9 of 40 452.211-72 Statement of Work/Specifications (FEB 1988) The Contractor shall furnish the necessary personnel, material, equipment, services and facilities (except as otherwise specified), to perform the Statement of Work/Specifications referenced in Section J. 452.211-73 Attachments to Statement of Work/Specifications (FEB 1988) The attachments to the Statement of Work/Specifications listed in Section J are hereby made part of this solicitation and any resultant contract. SCOPE OF CONTRACT Contractor will supply all materials, personnel, equipment and supervision to complete all work as described within the attached Specifications and drawings to include and all necessary valid licenses and permits as required within the Specifications. Work for this project consists of reconditioning 1.70 miles of Hilltop Road 717 per Base Item to a fourteen (14) foot wide roadway, in preparation for furnishing, hauling, and placing approximately 1,428 cubic yards of specified aggregate base course (compacted in-place) as Shown on the Drawings. Final blade the aggregate to provide a smooth-running surface with a centerline crown. Reference (FP-14) Standard Specifications for Construction of Roads and Bridges as shown in the Specifications and Drawings. Work to be completed shall be as shown in the Schedule of Items and described as follows: Base Item: - Recondition and compact 1.70 miles of roadway to provide for a fourteen (14) foot wide running surface. Compaction Method A. - Design quantity payment. - Deliver and place 1.70 miles of specified aggregate base course to a twelve (12) foot wide running surface, 4" inch compacted in-place depth and 1' foot taper each side. This equates to approximately 1,428 cubic yards. Compaction Method A. - Design quantity payment. - Final blade the aggregate to provide for a smooth roadway with a centerline crown as shown on Sheet 4 of 4. - Payment is incidental to placement of aggregate Pay Item 30201 See Section J of the solicitation for complete specifications. C.2 BIO-PREFERRED The Contractor must comply with Section 9002 of the Farm Security and Rural Investment Act of 2002 (FSRIA), Executive Order (EO) 13423, "Strengthening Federal Environmental, Energy, and Transportation Management," and the Federal Acquisition Regulation to provide biobased products. The Contractor shall utilize products and material made from biobased materials (e.g., insulating foam, composite panels, and concrete and asphalt release fluids) to the maximum extent possible without jeopardizing the intended end use or detracting from the overall quality delivered to the end user. All supplies and materials shall be of a type and quality that conform to applicable Federal specifications and standards. All supplies and materials to be used in the performance of work described herein are subject to the approval of the Contracting Officer Representative (COR). It is desirable that vendors be able to supply the greatest number of biobased products listed meeting the health and environmental specifications. Biobased products that are designated for preferred procurement under USDA's BioPreferred program must meet Solicitation No: 1240LT22Q0063 Project Name: 2021 Pine Ridge Ranger District Hilltop NFSR 717 Forest: Nebraska National Forest Page 8 of 40 the required minimum biobased content as stated in the USDA Final Rule available at www.biopreferred.gov. The Contractor should provide data for their biobased products such as biobased content and source of biobased material in addition to the biobased products designated by the U.S. Department of Agriculture in the BioPreferred Program, the Contractor is encouraged to use other commercially available biobased products. The awarded Contractor on each anniversary date of the contract shall compile a complete list of biobased products, including the information above, purchased to carry out the contract requirements. The Contractor shall list volume to be used and total cost for each individual product. This information will be used for reporting purposes. The Contractor shall comply with the provision at FAR 52.223-1, Biobased Product Certification. Additional information is available on the USDA BioPreferred Program homepage at www.BioPreferred.gov. Biobased products are commercial or industrial products that are composed in whole, or in significant part, of biological products or renewable domestic agricultural materials or forestry materials. A wide variety of Biobased products have been identified by categories on the BioPreferred Homepage Pre-Bid/ Pre-Proposal Conference A Pre-Bid Conference will not be held. Contractors are encouraged to tour the location on their own. For additional questions contact the Contracting Officer's Representative nathaniel.marcoe@usda.gov or 308-432-0303. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.