Renovation of a military facility in Anchorage, Alaska. Completed plans call for the renovation of a military facility.

Project Title: Replace Overhead Doors 673 CES is requesting the removal of four existing exterior manual overhead doors and associated rails and four manual exterior metal cage doors at buildings 55294 and 5528 IAW the Statement of Work. The subject projects Magnitude of Construction in accordance with FAR 36.204 is between $100,000 and $250,000. A sight visit will be held on 19 September 2022 @ 1400 in building 55294 673 CES is requesting the removal of four existing exterior manual overhead doors and associated rails and four manual exterior metal cage doors at buildings 55294 and 5528 IAW the Statement of Work. The subject projects Magnitude of Construction in accordance with FAR 36.204 is between $100,000 and $250,000. A sight visit will be held on 19 September 2022 @ 1400 in building 55294 Contract Description 1.1. The contract description is fully explained in the Statement of Work, Performance Work Statement or Statement of Objectives and all associated drawings and other attachments. The following are the general specifications and contract provisions that supplement and further outline the contractual and administrative actions required. If there are any questions regarding the information contained herein they should be addressed at the site visit or during the questions and answers period identified in the solicitation. 2. Contract Requirements 2.1.1 Drawings. When required, design drawings submitted by the Contractor shall show the basic layout and planning of work. Shop drawings shall show in detail the proposed fabrication and assembly of structural elements and/or the installation (i.e. form fit, and attachment details) of materials or equipment. Drawings must have sufficient detail to enable both the Contractor and the Government to understand the work to be accomplished. For the purpose of this requirement, the term drawings includes actual construction drawings, shop drawings, fabrication drawings, erection drawings, diagrams, layouts, schematics, descriptive literature, illustrations, room finish schedules, lighting/panel schedules, lighting level analysis plans, load/distribution schedules/calculations, performance and test data, and similar materials furnished by the Contractor to explain in detail specific portions as may be required. 2.1.2 Schedule of Material Submittals. The Contractor shall provide as a minimum, all submittalsidentified in the AF Form 66, Schedule of Material Submittals. The submittals shall include all reports, construction materials, and documentation that have a material effect on the construction effort including, but not limited to: large purchase items; long-lead items; required reports; and as-built drawings. 2.2 Meetings and Conferences 2.2.1 Pre-Construction Conference: The Contractor shall schedule a pre-construction conference prior to issuing a start work notice on any project, unless the requirement is waived by the Government. The Contractor shall reach out to the Project Manager and Contracting Specialist assigned to the project to schedule the meeting. The Project Manager will coordinate attendance of the Project Inspector, Base Environmental, the customer and any other applicable government party. The meeting shall be Contractor led and will discuss all aspects of the required work for a purchase order. At a minimum there should be a review of all material submittals, drawings, SOW review, schedule review, safety and accident protection, coordination's required, HAZMAT and Universal Waste storage/disposal, administrative issues, traffic control, as-built criteria, performance requirements, security procedures, and any questions the Contractor may have. Plan on these meetings taking about 60 minutes. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.