Renovation of a detention facility in Flintstone, Maryland. Completed plans call for the renovation of a 2,220-square-foot detention facility.

This project consists of the Contractor providing all labor, equipment, tools, materials, supplies, insurance, licenses and permits, etc., necessary to install approximately 2,200 square feet of a 2-part epoxy flooring system (Pharma floor) to walls and floor in the dormitory bathroom at Green Ridge Youth Center. Contractor shall prepare floor and walls by grinding or sanding existing floors and walls. Sanding will be required on existing epoxy. Grinding will be required where pealing exists and where concrete is exposed due to wear. There is approximately 43 SQ FT of flooring and 13 SQ FT of walls in need of grinding. Any further damage found during process will also need address with grinding. C. Contractor shall furnish and apply a two-part epoxy chip seamlessflooring (Pharma floor) and wallsystem. In addition, a two-component pigmented resilient epoxy resin surfacing sealing with a two component UV resistant Polyaspartic grout and a two component aliphatic low odor high solids urethane sealer shall be applied. D. As part of the contract, if the Contractor finds excessive damage, beyond the normal damage of the concrete. Grinding/removal of damaged concrete and repairs will be determined by the DJS Maintenance Supervisor or designee, the Contractor shall provide a Unit Price to repair 100 sq. ft. of concrete repairs,to include materials and labor as stated in specifications. E. Contractor shall provide appropriate material to join new flooring with existing flooring at each doorway. F. The epoxy flooring system shall have the color and texture to be determined by DJS Maintenance Supervisor or designee. G. The epoxy flooring shall be minimum 1/4" thick. It shall be applied to the prepared area(s) strictly in accordance with the Manufacturer's recommendations. The finished floor and wall coating system shall be uniform in color, texture, and appearance. All edges that terminate at floor discontinuities and other embedded items shall be sharp, uniform, and cosmetically acceptable with no thick or ragged edges. H. Provide system data sheets in compliance with requirements of United States Department of Agriculture (USDA), Food and Drug Administration (FDA) and local Health Department. I. It is the Contractor's responsibility to verify all measurements and calculate quantities prior to bidding. J. Contractor shall make sure all existing plumbing floor clean outs are level with new floor and all water is directed to drains to avoid puddling. K. The Contractor shall provide an emergency phone number for warranty repairs. Small Business Reserve Designation Yes All questions related to the MBE certification process should be addressed to the Maryland Department of Transportation, Office of Minority Business Enterprise, 7201 Corporate Center Drive, Hanover, MD 21076. You may contact MDOT at 1-800-544-6056