Site work for a water / sewer project in Houston, Texas. Completed plans call for site work for a water / sewer project.

In general, the work consists of: A. The work, as detailed below, shall consist of site rebuilding of one (1) Alfa Laval AS-H Belt Press G3 200 (Klampress(R) Extended), 2.0 Meter Belt Filter Press (BFP) as specified herein for the Clear Lake City Water Authority (CLCWA). Rebuilding of the machine will be performed at the CLCWA's facility. B. All local motor disconnect devices and/or local motor lock-outs that may be required by a governing electrical code shall be provided and installed by the Owner. The Contractor shall be responsible for loading/off-loading of parts/crates at the jobsite. The Contractor shall be responsible for movement of parts in/out of the Sludge Dewatering Building. C. The scope of supply includes the following: 1. A complete rehabilitation of the existing belt filter press including all labor, parts, shipping, assembly/disassembly, arranging, scheduling and equipment re-commissioning services shall be provided by the Contractor. The Contractor shall be responsible for scheduling and paying for all inbound and outbound freight costs to deliver materials to/from the job site. The Contractor shall also be responsible for receiving any deliveries made to the job site and must be present for all deliveries made to the job site regardless of scheduling. 2. All work shall be coordinated with the Plant Superintendent prior to commencing site work. 3. All parts shall be new, of current original equipment manufacturer (O.E.M.) or compatible, as detailed in the sections within this specification. 4. All equipment specified under this section shall be provided by a single manufacturer/supplier. 5. All labor to perform site repairs shall be by qualified factory trained personnel experienced in the disassembly/reassembly of the Alfa Laval AS-H Belt Press G3 200 (Klampress(R) Extended), 2.0 Meter unit. 6. All labor to re-commission the rebuilt Alfa Laval AS-H Belt Press G3 200 (Klampress(R) Extended), 2.0 Meter unit shall be by qualified factory trained personnel with at least 8 years of experience in the mechanical, electrical and process operation of the Alfa Laval AS-H Belt Press G3 200 (Klampress(R) Extended), 2.0 Meter unit. No person may represent more than one bidder at the pre-bid conference. If a person claims to represent more than one bidder at the pre-bid conference, the bid of each bidder so represented will be returned unopened. Each bid shall be submitted on the prescribed form and accompanied by a bid bond, cashier's check or certified check in the amount equal to ten percent (10%) of total base bid. If certified or cashier's check is used as bid security, check must be drawn on a responsible bank located in the State of Texas and made payable to Owner only. It is the responsibility of the contractor bidding the project to ensure the accuracy of the reproduction of all bid documents and construction drawings. This responsibility includes, but is not limited to, proper scaling, paper width and length, etc. Failure to do so may result in errors in the unit bid quantities and/or bid amounts. The Owner reserves the right to waive any informalities or minor defects and to reject any or all bids. In case of the lack of clarity or ambiguity in prices, the Owner reserves the right to accept the most advantageous or reject the bid. The successful bidder will be required to provide payment and performance bonds in the amount of one hundred percent (100%) of the contract price. OWNER Eight Hundred Dollars ($800.00) for each day