This is a service / maintenance or supply contract in Baton Rouge, Louisiana. Contact the soliciting agency for additional information.

Supply One (1) Fairbanks Model 23HH-1 Stage, Vertical Turbine Pump, or Approved Equal for the Jefferson Parish Department of Sewerage - Harvey Wastewater Treatment Plant The bidder shall supply one (1) Fairbanks model 23HH 1--Stage, vertical turbine pump, or approved equal. Any bids submitted for alternate pump manufacturers, other than that as specified, must include in their bid all information needed to fully demonstrate complete compliance with the requirements of these specifications, and dimensional duplicity of the existing pump. It is the bidder's responsibility to provide adequate information necessary for the complete evaluation of their proposed equipment. Jefferson Parish shall be the sole judge as to the equality of any alternate manufacturer's offering. A. One pumping unit is required under this bid, which shall be driven by a squirrel cage induction motor as specified. B. Pumping unit will take suction from the effluent chamber. C. All working parts of the pump, motor, such as bearings, wearing rings, shaft, sleeves, etc., shall be standard dimensions built to limit gauges or formed to templates, such that parts will be interchangeable between like units and such that the Owner may, at any time in the future, obtain replacement and repair parts for those furnished in the original machines The pump bidder must be listed as a factory authorized service center for the brand they are bidding and be capable of completely servicing the proposed pump withing one (1) hour of the project site, once pump is delivered. The pump bidder must have a direct factory service center and stocking facility capable of completely servicing and suppling spare parts for the proposed pump within one (1) hour of the project site. The bidder's factory service center facility shall be available for Jefferson Parish inspection on a twenty-four (24) hour prior notice. The bidder's service center must have full time, factory trained mechanics certified to service the equipment being offered.