Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
This is a service / maintenance or supply contract in Troy, North Carolina. Contact the soliciting agency for additional information.
This contract is for Weigh Station Weigh in Motion (WIM) Scale Maintenance for Montgomery County specifically the WIM, DOT Reader, and Automatic License Plate Reader. This is intended to be a contract for normal annual maintenance. The duration of this contract shall be 12 months from date of award notification. The state reserves the right to extend this contract for two (2) additional 12-month periods at its sole discretion. Increases in labor rates, (normal & overtime) may be requested by vendor at time of contract extension not to exceed the CPI index for inflation for the previous year. All work and materials shall be in accordance with the provisions of the General Guidelines of this contract, the Project Special Provisions, the North Carolina Department of Transportation Standard Specifications for Roads and Structures, the North Carolina Department of Transportation Roadway Standards Drawings, and the current edition of the Manual of Uniform Traffic Control Devices (MUTCD). Should a catastrophic failure occur, NCDOT reserves the right to seek repair or replacement of the scale and components from other sources. The Contractor shall keep himself fully informed of all Federal, State, and local laws, ordinances, and regulations, and shall comply with the provisions of Section 107-1 of the Standard Specifications website. The Contractor may begin work prior to this date upon approval of the Weigh Station Manager. If such approval is given, and the Contractor begins work prior to the date of availability, the Department of Transportation will assume no responsibility for any delays caused prior to the date of availability by any reason whatsoever, and such delays, if any, will not constitute a valid reason for extending the completion date. There will be no contract, and no purchase order for scale maintenance until all required prerequisite conditions and certifications have been satisfied. At all times during the life of this contract, the Contractor shall provide one permanent employee who shall have the authority and capability for overall responsibility of the project and who shall be personally available at the work site within 24 hours notice. At all times that work is being performed, the Contractor shall have present at the scale site, one competent individual who is authorized to act in a supervisory capacity over all work on the scales. The individual who has been so authorized shall be experienced in the type of work being performed and shall be fully capable of managing, directing, and coordinating the work; of reading and thoroughly understanding the contract; and receiving and carrying out directions from the Weigh Station Manager or his authorized representatives. He shall be an employee of the Contractor unless otherwise approved by the Weigh Station Manager. The Contractor may, at his option, designate one employee to meet the requirements of both positions. However, whenever the designated employee is absent from the work site, an authorized individual qualified to act in a supervisory capacity on the project shall be present. The contractor shall furnish a 24-hour emergency contact number for emergency repairs. Maintain the WIM scales at Montgomery County US-52. The contractor must be a factory authorized repair center for International Road Dynamics (IRD) WIM, DOT Reader and Automatic License Plate Reader scales and have in stock the appropriate parts to maintain this scale. Certification from the manufacturer of IRD scales as an authorized repair and service center shall accompany bid response. The bidder shall indicate and itemize their labor rates (regular & overtime) along with transportation charges for the needed labor and equipment to accomplish the lubrication of the WIM scale in the ramp. All invoices must indicate parts cost, list price less percent discount, freight, etc. All work shall be warranted against defects in workmanship for a period of no less than 60 days. All new components installed shall be warranted for a period of no less than the factory warranty period for parts and/or labor, or six (6) months, whichever is greater. A copy of the factory warranty shall accompany all new parts installed. In the event of a new part failure, the part will be replaced at no cost to NCDOT unless the failure is deemed to be caused by an act of God. The Department of Transportation expects prompt service that will keep scales operational in an acceptable amount of time. Under normal working conditions, service is expected to be provided within 8 hours from time of notification. It will be at the departments' sole discretion to choose a Contractor that it deems capable to meet the response time with service within a geographic region. The weigh station manager will be responsible for closing station(s) at a mutually agreed to date to allow for work to be performed in a safe manner. The award of the contract, if it be awarded, will be made to the lowest responsible Bidder in accordance with Section 103-04 of the Standard Specifications for Roads and Structures 2018. The lowest responsible will be notified that his bid has been accepted and that he has been awarded the contract. If delivered by mail, the sealed envelope shall be placed in an outer envelope and shall be addressed as Samantha NCDOT reserves the right to reject all bids Samantha Bryant Green North Carolina Department of Transportation Purchasing Section, Room 334B 1510 Mail Service Center Raleigh, North Carolina 27699-1510..
Post-Bid
Roads / Highways
Public - State/Provincial
Plans and Specifications are not available for this project. If that changes, they will be made available here.
Trades Specified
Division 00 - Lorem Ipsum
Find More Local Projects
Within 75 Miles of This Project
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
September 29, 2022
October 31, 2022
Multiple Locations, Troy, NC
Related To This Project
Troy, NC
Bid Date: Feb 23 2023
Troy, NC
Bid Date: Feb 28 2023
Troy, NC
Bid Date: Apr 25 2023
Troy, NC
Bid Date: Apr 25 2023
Troy, NC
Bid Date: Aug 10 2023
Troy, NC
Bid Date: Jun 05 2023
Troy, NC
Bid Date: Jul 18 2023
Troy, NC
Bid Date: Mar 17 2020
Troy, NC
Bid Date: Aug 09 2022
Troy, NC
Bid Date: Aug 09 2022
Troy, NC
Bid Date: Jul 14 2022
Troy, NC
Bid Date: Jun 13 2022
Troy, NC
Bid Date: Jul 12 2022
Recently Viewed
--
--
--
--
--
--
--
--
--
--
Get the most reliable construction project data instantly.
Sign up now to get instant access to project search, five projects and five companies, free.
Get the right
data with Project Intelligence
Project Shared
with
example@example.com
Choose what you would like to do.
Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.
What is your business type?
We have a wide variety of products that are purpose built for certain business types.