Site work and new construction of a mixed-use development in Allentown, Pennsylvania. Completed plans call for the construction of a playground / park / athletic field; for site work for a playground / park / athletic field; swimming pool; and swimming pool.

**As of January 27,2023, this project has not yet been awarded. A timeline for award has not yet been established.** MC Project No. 21000467A The Contractor shall be responsible for the installation of a series of water features (also referred to as spray features), and associated plumbing, controls, and electrical. All work shall be performed as indicated on the Contract Drawings and Specifications and include every aspect of work as obvious or implied and necessary to make the work complete and fully operational. The Contractor shall coordinate with the spray equipment vendor and the spray equipment manufacturers for all installation requirements and guidelines prior to bidding the project. The Contractor is also responsible for supplying all required ancillary appurtenances for the installation of the spray features, complete, in place. Questions regarding electronic submissions are welcome via email Purchasing.Agent@allentownpa.gov. Owner has selected these features to be supplied at the pool. Ifthe Contractor selects an alternate manufacturer, the features shall have the same visual look, and functionality as the features shown on the contract plans. Spray feature manufacturer shall be Vortex, or approved equal. Electrical Connections: All main power electrical connections from the exhibit controller to the valves are to be furnished and installed per NEC 680, local codes, manufacturer's recommendations, drawings, and as required by the Engineer in DIVISION 26. Water Connections: Water connection, piping, and valves required to operate the spray features are to be furnished and installed per local codes, manufacturer's recommendations, drawings, and as required by the Engineer. The Contractor shall be required to install all the manufactured equipment and water spray features, all water piping and wiring connecting the manifold and the independent features, and all footings/foundations associated with the work. Contractor shall field install a prefabricated control manifold box in the pool deck. This will allow a place where the spray features can be calibrated and a location for where the Owner can winterize the system. Contractor shall laminate a system start-up and shutdown control instruction sheet and mount inside the door ofthe mechanical room, and a complete set of instruction in a manual for mobile use. The contractor or sub-contractor must be experienced with installing this type of spray equipment and satisfy the owner and engineer of these qualifications. The contractor or subcontractor must demonstrate successful completion of at least five (5) water feature projects ofthis size and scope and be prepared to submit references upon request. Construction of a new pool facility including utility services, new admissions and restroom support buildings, pool (including pumps, filters, spray features), pool deck (including drainage), artificial turf sitting areas, perimeter fencing, site lighting and other Work indicated in the Contract Documents. It is the purpose of this Invitation to Bid to secure a contractor for construction of a new pool facility including utility services, new admissions and restroom support buildings, pool (including pumps, filters, spray features), pool deck (including drainage), artificial turf sitting areas, perimeter fencing, site lighting and other Work indicated in the Contract Documents. Questions regarding electronic submissions are welcome via email through Purchasing.Agent@allentownpa.gov. Bid Bond required DECEMBER 5, 2022 AT 4:00 P.M. Email All Questions To: www.publicpurchase.com, by the aforementioned date