Site work and outdoor lighting for a playground / park / athletic field in Dillon, South Carolina. Completed plans call for site work for a playground / park / athletic field; and for outdoor lighting for a playground / park / athletic field.

The City of Dillon is seeking proposals from sport field lighting professionals interested in contracting to provide lighting improvements to the City of Dillon Sports Complex four (4) baseball/softball fields that are 200 fields. Contractor to provide full - service materials and installation for the replacement of existing lights. PROJECT DESCRIPTION The City is seeking proposals from qualified lighting professionals to provide materials and installation of electrical and lighting necessary to replace the old system at the SC Highway 34 Baseball Complex. The scope of work for the project is described below: 1. Remove all existing light fixtures and wood poles from the four (4) baseball fields. Existing wiring will be abandoned below grade. 2. Furnish and install a new LED lighting system to service the four (4) baseball fields, including, but not limited to: a. 16 galvanized steel poles, or approved equal b. 16 concrete bases with integrated lightning grounding c. Factory wired and tested remote electrical component enclosures d. Factory assembled wire harnesses and pull boxes e. 16 factory wired pole top luminaire assemblies f. Factory aimed and assembled luminaries g. The LED lighting system shall be installed using a light control technology to reduce glare and light spillover, such as the Musco TLC for LED Technology, or approved equal. h. The LED lighting system shall be UL listed as a complete system. i. The LED lighting system shall be controllable remotely using the Musco Control-Link System, or approved equal. j. The LED lighting system shall be dimmable using the Musco Multi-Watt dimming control system, or approved equal. 3. Furnish and install a new 480-volt, single phase, 200-amp NEMA 3R electrical service panel located within 10 feet of the existing utility transformer. Contractor shall verify existing electrical requirements and compatibility. 4. Furnish and install new branch circuits to each pole using copper conductors.