Renovation of a municipal facility in Pepperell, Massachusetts. Working plans call for the renovation of a municipal facility.

** As of December 1, 2022, bids received were over the budget. Project will rebid but no definite date yet.** Contractor Qualification DCAMM Certificate This project is for the repair, replacement, and restoration of interior finishes. The work includes removal of and installation of ceilings, insulation, plaster repair, paint restoration, painting, door replacement, and flooring at the second floor (two story space) meeting space of the historic town hall with matching historic construction. A. Conditions of the Contract and Division 01, General Requirements, apply to work of this Section. Where paragraphs of this Section conflict with similar paragraphs of Division 01, requirements of this Section shall prevail. B. Examine Drawings and other Sections of Specifications for requirements that affect work of this Section. C. As used in this Section, "provide" means "furnish and install" and "HVAC" means "Heating, Ventilating, and Air Conditioning" and "POS" means "Provided Under Other Sections". "Furnish" means "to purchase and deliver to the project site complete with every necessary appurtenance and support," and "Install" means "to unload at the delivery point at the site and perform every operation necessary to establish secure mounting and correct operation and the proper location in the project." D. Perform work and provide material and equipment as shown on Drawings and as specified or indicated in this Section of the Specifications. Completely coordinate work of this Section with work of other trades and provide a complete and fully functional installation. Drawings and Specifications from complimentary requirements; provide work specified and not shown, and work shown and not specified as though explicitly required by both. Although work is not specifically shown or specified, provide supplementary or miscellaneous items, appurtenances, devices and materials obviously necessary for a sound, secure and complete installation. Remove all debris caused by Sub-Contractors' work. E. Drawings are diagrammatic and indicate general arrangement of systems and work included in Contract. It is not intended to specify or to show every offset, fitting or component; however, Contract Documents require components and materials whether or not indicated or specified as necessary to make the installation complete and operational. F. Perform work strictly as required by the rules, regulations, standards, codes, ordinances, and laws of local, state, and federal government, and other authorities that have lawful jurisdiction. G. Give notices, file plans, obtain permits and licenses, pay fees and obtain necessary approvals from authorities that have jurisdiction. H. As work progresses and for duration of Contract, maintain complete and separate set of prints of Contract Drawings at job site at all times. Record work completed and all changes from original Contract Drawings clearly and accurately, including work installed as a modification or addition to the original design.