Renovation of an elderly care / assisted living facility in Newark, New York. Completed plans call for the renovation of a elderly care / assisted living facility.

Service-Disabled Veteran-Owned Set Aside: No Contract term: 30 days after completion of project County(ies): Wayne Location: 407 Vienna Street, Newark, NY 14513 Business entities awarded an identical or substantially similar procurement contract within the past five years: Question Deadline 11/11/2022 Any questions not asked at the site visit must be submitted in writing to Fl.Purchasing@opwdd.ny.gov within 2 business of the site visit. Vendors will receive a response within 2 business days after the deadline for submitting questions. All questions and answers will be e-mailed to all vendors that attended the mandatory site visit. SCOPE OF WORK includes, but is not necessarily limited to the following: Complete Interior painting of residence; Walls, Ceilings, Closets, Doors, Base and Trim, etc. 1. Price quote shall include all materials (paint, stain, necessary tools and accessories) and labor. 2. Paint, stain and other finishes must be a SHERWIN WILLIAMS product selected from the DDSO color chart by House Director or Maintenance Supervisor/Designee. The colors chosen for common areas (kitchen, dining, rec rooms, hallways, etc.) must be neutral colors. 3. House accessibility to be determined by House Director. 4. Use good lead safe practices including limiting dust and wiping down all local areas with a damp rag at the end of each work day. 5. Remove furniture as required and return to place when job is complete. 6. Disconnect/Remove appliances as required and return/re-connect when job is complete. 7. Removal all pictures, outlet and switch covers and return to place when job is complete. 8. Remove all electronics if needed and return/re-connect to place when job is complete. 9. Imperfections (eg: Holes gouges, and dings) on wall and ceiling surfaces shall be filled with a proper spackling compound. Then wipe smooth with a damp sponge and primebefore a top coat to prevent flashing. 10. Clean and prepare surfaces to be painted per the manufacturer's written instructions for each substrate condition and as specified. The is to include wall paper and sizing removal and spackling of all damaged wall surfaces prior to painting. All surfaces must, be smoothed with a damp sponge after patching to match existing surface to ensure invisible repairs then primed before applying topcoat. 11. Paint used in bathrooms shall include a mold inhibitor. 12. Ceiling paint shall be a flat finish, except in Bathrooms/Kitchens where a semi-gloss finish should be used. 13. Paint used on walls and trim must be a semi-gloss finish. 14. A clear satin low VOC coating to be applied to all-Natural Wood trim and doors if needed. 15. Any stains on ceilings and walls shall be primes, with a satin killing primer to prevent bleed-through of topcoat. 16. All surfaces shall have two (2) coats of paint minimum; three (3) or more if necessary, for complete coverage, same for varnish's if applicable. 17. Apply paints and stains by brush and roller only, per the manufacturer's written instructions. Use primer as recommended by manufacturer. 18. Use drop cloths to cover stationary furniture, flooring, appliances, etc. 19. See attached floor plan for work that needs to be addressed on a room-to-room basis. 20. Sprinkler heads, fire alarm pull stations, smoke detectors, and heat detectors must be free of any paint when the job is complete. 21. Remove and dispose of any empty cans, rags, rubbish, masking and other rubbish materials at the end of each work day. 22. Clean glass and paint spattered surfaces by scraping and washing. .