Site work for a bridge / tunnel in Channel-Port-aux-Basques, Newfoundland. Completed plans call for site work for a bridge / tunnel.

Closing Time: 2:30 PM (NT) ** Please note that there has been 3 addendum issued for this project. ** Question Acceptance Deadline 2022/11/07 02:30:00 PM NT Work includes, but is not necessarily limited to, the following: - Mobilization and demobilization, including all labor and equipment as specified and as required to carry out the work. - Clean, sandblast and re-coat all steel members and connections in between Piers #2-4, as shown on drawings. - Supply and install 100 bolts required to be replaced for steel connections between Piers #2-4, as shown on drawings. Locations to be determined by Owner or Owner's Representative on site. - Supply and install 24 angle tabs and re-weld to grating and bolt to existing steel framing between Piers #1-3, as show on drawings. Locations to be determined by Owner or Owner's Representative on site. - Repair all spalling, cracking and delamination for all concrete walls, diaphragms, and decks between Piers #2-4; as shown on drawings. - Submittals: Preparation, submission, and implementation of an approved Construction Schedule. Preparation, submission, and implementation of an approved Site-Specific Safety Plan. Preparation, submission and implementation of an approved Traffic Control and Pedestrian Plan. Preparation, submission, and implementation of an approved Site-Specific Environmental Protection Plan. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.