Renovation of a residential development in Mobile, Alabama. Completed plans call for the renovation of a residential development.

All work shall meet or exceed the requirements of the ICC Residential Code and the Standard Building Code Section 1501 for roof materials, application, installation, etc. and Section 309 for roof and ceiling framing, and all other codes that govern. A building permit is required if there is any wood to be replaced If you are a new Contractor and are interested in bidding with our program, please contact Ginny Kirby at 251-208-6297. All Contractors must submit the required documentation to be registered in our program before any jobs can be awarded. If you have any questions, you can call Ginny Kirby at 251-208-6297. Pictures must be provided, through each step, to housing inspector during repair. Pictures must be clear, and referenced to home being worked on. Pictures are to be provided in real time, prior to home being completed. Areas that are found to be spaced decked shall be covered with exterior grade sheathing material after removing the existing decking. It is the contractors responsibility to ensure the framing and structure will support the additional load. Remove existing roofing materials down to bare decking. Check all roof trusses/rafters and repair/replace as needed to ensure that new roof structure is flat and smooth without rises or depressions in roof system. Replace all rotten, broken, un-even, weak, or deteriorated decking framing. o Any exposed repaired or replace wood should be protected from the elements, painted to match existing color or white. Replaced/repaired decking shall be level and ready to accept felt and shingles. Check all roof trusses for strength and stability before re-shingling house. Remove all unused elements, vents, etc., that are not operational and close them below roof level. Re-flash all valleys, vents, roof openings, and chimneys. o Install new boots around all roof penetrations. Haul away debris immediately. Use a magnetic sweep around the perimeter of house and rake away any other debris. Cover entire roof decking with self-adhered roofing underlayment then install synthetic or 15# asphalt impregnated felt underlayment. Prepare roof decking to accept a ridge vent Any responses faxed or e-mailed will be rejected. This is a sealed bid. All responses must be submitted in a sealed envelope with the bid number on the outside of the envelope with the bid opening date. Any response that arrives improperly marked or with no bid number and opening date on the outside of the delivery or express package and opened in error will be rejected and not considered. It is the responsibility of the bidder to insure that their bid response is delivered to and received in the at the location or address specifically directed in the specification by the date and time prescribed.