Demolition, site work, paving and new construction of a mixed-use development in Ellsworth AFB, South Dakota. Working plans call for the construction of a 40,000-square-foot military facility; for the demolition of a military facility; for site work for a transportation facility; for paving for a transportation facility; and water / sewer project.

The Corps of Engineers Omaha District is soliciting comments from the construction community addressing the potential use of Project Labor Agreements (PLA) for large scale construction projects (exceeding $25 million) within the Ellsworth Air Force Base (EAFB), South Dakota area. Provide your responses NLT 2PM, Central Standard Time, 5 January 2023 to constance.r.ellard@usace.army.mil and amanda.e.eaton@usace.army.mil . Ensure your response is limited to 5 pages and the Subject Line of your response includes "PLA Survey - B-21 Fuel System Maintenance Dock (Fuel Dock), Ellsworth Air Force Base (EAFB), South Dakota". Please provide your contact information in the body of the email. A PLA is defined as a pre-hire collective bargaining agreement between a Prime contractor and one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S. C. 158(f). Federal Acquisition Regulation (FAR 22.503) Policy provides that: (a) Project Labor Agreement (PLA) is a tool that agencies may use to promote economy and efficiency in Federal procurement. Pursuant to Executive Order 13502, agencies are encouraged to consider requiring the use of project labor agreements in connection with large-scale construction projects. (b) An agency may, if appropriate, require that every contractor and subcontractor, or certain subcontractors, engaged in construction on the project agree, for that project, to negotiate or become a party to a project labor agreement with one or more labor organizations if the agency decides that the use of project labor agreements will (i) Advance the Federal Governments interest in achieving economy and efficiency in Federal procurement, producing labor-management stability, and ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards and other matters; and (ii) Be consistent with law. Reference: FAR 52.222-33 Notice of Requirement for Project Labor Agreement; FAR 52.222-34 Project Labor Agreement. Request responses to the following questions: (1) Do you have knowledge that a PLA has been used in the local area on projects of this kind If so, please provide supporting documentation. (2) Are you aware of skilled labor shortages in the area for those crafts that will be needed to complete the reference project If so, please elaborate and provide supporting documentation where possible. (3) Are you aware of time sensitive issues/scheduling requirements that would affect the rate at which the referenced project should be completed If so, please elaborate and provide supporting documentation where possible. (4) Identify specific reasons why or how you believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in federal procurement. (5) Identify specific reasons why you do not believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in federal procurement. (6) Identify any additional information you believe should be considered on the use of a PLA on the referenced project. (7) Identify any additional information you believe should be considered on the non-use of a PLA on the referenced project. The information gathered in this survey should include the following information on projects completed in the last 2 - 5 years: 1. Project Name and Location 2. Detailed Project Description 3. Initial Cost Estimate vs. Actual Final Cost 4. Was the project completed on time 5. Number of craft trades present on the project 6. Was a PLA used 7. Were there any challenges experienced during the project Project Description: This is a Fully Designed Project. This is one of several major construction projects that serves as part of a multi-year facilities beddown in support of the B-21 program at EAFB, SD. This project will provide a new +/- 40,000 SF single-bay hangar facility and associated airfield apron, site features, utilities, and infrastructure for maintenance of the emerging B-21 airframe. The project may include bid options for furniture, furnishing and equipment (FF&E), user-funded equipment, intrusion detection systems (IDS), access control systems (ACS), and closed-circuit television (CCTV) systems. Disclosure of the magnitude of construction, as prescribed in FAR 36.204 and DFARS 236.204, is between $25M and $100M. More specifically, the magnitude of construction for this project is projected to be between $60M-$100M. Contractors responding to this market survey must submit their responses via e-mail to Constance Ellard at constance.r.ellard@usace.army.mil and amanda.e.eaton@usace.army.mil no later than 2:00 PM CST, 5 January 2023. The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.