Site work for a water / sewer project in Caddo Mills, Texas. Completed plans call for site work for a water / sewer project.

Covenant Ranch Lift Station Pump Upgrade A. The earthwork consists of operations required for excavation, non-expansive earth fill; structure backfill and general earth fill, as may be required during development of the project. The term "embankment" as used in this section refers to the compacted earth fill required for structure pads, roadway embankment fill, and miscellaneous related fill. The "subgrade" refers to the surface of the cleared and stripped areas that are designated to receive fill roadways or structures. B. The CONTRACTOR shall inform and satisfy himself as to the character, quantity, and distribution of material to be excavated. C. In the event of a conflict between this specification and project plans (drawings) then the plans will take precedence. A. Seeding is required on all areas (unless otherwise stated in the plans) where existing topsoil or vegetation is modified, damaged, or otherwise disturbed during construction of this project and in areas where erosion protection is required. B. Seeding work includes: 1. Preparation of subsoil. 2. Placing topsoil. 3. Fertilizing. 4. Seeding. 5. Mulching. 6. Maintenance. C. In the event of a conflict between this specification and project plans (drawings) then the plans will take precedence. A single pre-approved SCADA system integrator shall install a Remote Terminal Unit (RTU) for all Supervisory Control and Data Acquisition functions at the proposed Lift Station. To assure compatibility with the existing SCADA system and continuity of existing warranties, TraC-n-trol, Inc. shall provide the SCADA RTU (see drawings) and related equipment, including design, integration, and programming services to meet the needs of the Owner (no equal). TraC-n-trol shall provide labor and materials as specified, including insurance and warranties to meet the project requirements. All bidders shall contact TraC-n-trol, Inc., Ryan Wood at 512-930-5721 x 16 or email at rwood@tracntrol.com, for all SCADA related questions and quotes. A supplier will provide a separate Pump Control Panel (PCP) that will integrate with a SCADA Remote Terminal Unit (RTU) while also providing pump control for the lift station. TraC-n-trol, Inc. is a preapproved vendor for the RTU and SCADA Upgrade. The pump supplier and resulting PCP has not been preselected. This project shall be identified in the Plans and Specifications. In the event of a conflict between this specification and project plans (drawings) then the plans will take precedence. For Covenant Ranch Lift Station Pump Upgrade Furnish and install complete raceway systems A pre-bid conference will not be held. Bidding Documents may be examined at the office of the Engineer, Dunaway-DBI, 118 McKinney St, Farmersville, TX 75442, on Mondays through Fridays between the hours of 8 a.m. and 5 p.m.