Renovation of an educational facility in Laurel, Mississippi. Completed plans call for the renovation of a educational facility.

For Roofing Program Phase 2 Upper Elementary All proposals must be on file with the Quitman School District prior to the opening time as stated above. All proposals must be sealed and clearly marked on the outside of the envelope as indicated "Roofing Program Phase 2 - Upper Elementary" to be opened on {insert bid date here}. Envelopes not so marked are submitted at the risk of the Bidder and the School District assumes no responsibility for the premature opening of same by any School District employee. The Owner reserves the right to waive any informalities and to reject any or all bids Each bidder must deposit with his bid (or upload at Bidders Option), security in the amount, form and subject to the conditions provided in the Instructions to Bidders. Performance and Payment Bonds will be required from the successful bidder. Bidders shall comply with law of the State of Mississippi requiring Certificate of Responsibility. Resident contractors shall, in accordance with laws of the State of Mississippi, be granted preference over non-residents in the award of this contract in the same manner and to the same extent as provided by the laws of the state of domicile of the non-resident. A non-resident contractor shall attach to his proposal a copy of his resident state's current law pertaining to such state's treatment of non-resident contractors. The successful bidder must adhere to the Owner's policy concerning non-discrimination without regard to race, creed, color, age, sex, national origin or handicap. No bidder may withdraw his bid within sixty (60) days after the actual date of the opening thereof. Base Bid includes the following: 1. All temporary fences, and general protection system for the students, faculty, and public for this portion of the Work. 2. Protection of existing facades, sidewalks, landscaping, etc. to remain. 3. Temporary waterproofing at all roof penetrations where mechanical or other equipment is removed during progression of the Work, and where building remains open for more than 8 hours. 4. Removal of existing accessories, insulation, edge metal, gutters, downspouts, flashings, curbs, etc., removal/replacement of existing mechanical/electrical equipment and exhaust fans. 5. Furnish and installation of new PVC roofing system, including but not limited to the following (depending on conditions): a. PVC roofing and flashings, cover board, insulation (rigid and some tapered), metal edge, preformed or liquid flashings, metal flashings, gutters, downspouts, and other items shown and required for a complete installation.