Renovation of a municipal facility in Austin, Texas. Completed plans call for the renovation of a municipal facility.

Q&A End Date:Jan 13, 2023 3:00:00 PM EST Building: 140 Upgrade the Intercom Headend System for Building #140. This building has [3] Areas with Headend rooms for the Security Detention Equipment, areas A -B -Central, which are controlled by 3 touchscreen stations (A-B-Central). Use the existing Headend Cabinets that are in place, existing wiring in place and field stations. Installation of an integration module for the Harding IC system to communicate with the Touchscreens and install new Audio PTT (push to talk) consoles at each location. This will include the new Harding 4 wire system that will connect to the existing field stations. The existing controls are SCS which will be programmed with the changes noted for each area. No door control changes at this time. The existing Rack space will be utilized for this project. o Intercom System Upgrade - A/ A Housing Area -1 Amp, 1 Page Amp, 68 Intercom stations [68 IC and 10 PG] o Intercom System Upgrade - B / B Housing Area - 1 Amp, 1 Paging Amp, and 52 Intercom Stations o Intercom System Upgrade - Central / Central Control Area - 2 Amp, 2 Paging Amp, and 66 Intercom Stations o Control System Integration / 3 Pod Control Station and 1 Central Station Building: 160 This building has [3] Areas with Headend rooms for the Security Detention Equipment, areas A -B - C, which are controlled by 4 touchscreen stations (A-B-C-Central). Use the existing Headend Cabinets that are in place. Installation of an integration module for the Harding IC system to communicate with the Touchscreens and install new Audio PTT (push to talk) consoles at each location. This will include the new Harding 4 wire system that will connect to the existing field stations. The existing controls are SCS which will be programmed with the changes noted for each area. No door control changes at this time. The existing Rack space will be utilized for this project. o Intercom System Upgrade - A / A Housing Area - 1 Amp, 1 Page Amp, 26 Intercom stations [J6 IC and 10 PG] o Upgrade - B / Upgrade - B Housing Area and Central Control - 2 Amp, 2 Paging Amp, and 66 Intercom Stations o Intercom System Upgrade - C / C Housing Area - 1 Amp, 1 Paging Amp, and 76 Intercom Stations o Control System Integration / 3 Pod Control Station and 1 Central Station Building: 400 This is to replace the headend equipment with Harding and convert the existing system from analog to digital. Configure and set up the system to work with the existing officer control system with the exclusion of the obsoleted PDA system. PDAs are not part of the new Harding integration. o Will install all new Harding intercom systems in the equipment rooms and run new wires to the control stations for new masters. o Reuse the existing wire to the intercoms and the intercoms to save the facility cost on all new intercoms. o Replace up to 10 of the most damaged end station intercoms while installing the new gear to help keep the facility in as best working condition as possible. o Programming group will reconfigure the TS control system to work with the new Harding hardware intercom system. o Onsite technicians will need to rework the equipment racks to fit the new system and remove the old