Site work for a water / sewer project in Pico Rivera, California. Conceptual plans call for site work for a water / sewer project.

The City of Pico Rivera is seeking a qualified firm to perform engineering design services associated with the City's Water Main Replacement Projects. The Consultant shall provide all services necessary to assess, evaluate, and provide plans, specifications and estimate package (PS&E) and the preparation of the construction bid package per local, state, and federal requirements for water main replacement projects in a professional and competent manner for the bidding purposes. The water main projects will replace approximately 1,975 linear feet (LF) of 4-inch water main with 8-inch water main, 4,580 linear feet (LF) of 10-inch water main, 3,500 linear feet (LF) of 17-inch water main with 18-inch DIP water main, and associated service lines, valves, fire hydrants and other appurtenances. Other Details Project tasks shall include, but are not necessarily limited to, those items noted below. If the Consultant feels that additional tasks are warranted, they must be clearly identified in the Consultant's proposal. The selected Consultant shall provide all instruments, equipment, tools, personnel, and supervision required to provide the engineering design services for the water main replacement project identified in this scope, including but not limited to the following tasks: 1. Become familiar with the City's potable water distribution systems in the area by reviewing City-provided maps of the pipeline networks and available "as-builts" / record drawings and site-specific data to be used as references. 2. The City will make available the GIS geodatabase as well as the latest aerial for the specific site and subject neighborhood where available. 3. Obtain existing substructure facilities/utilities information from respective utility agencies or company for inclusion to the construction plans. 4. A field visit of the project area/ site shall be warranted. 5. The Consultant or its California Registered Land Surveyor shall conduct the necessary land surveys in order to prepare design and construction plans for the project. Such surveys shall provide sufficient site-specific data for proper and accurate design. 6. Design and prepare construction plans and special provisions for the Project, in accordance with the City Standard, and latest applicable AWWA Standards. 7. The construction plans shall be submitted at the following levels: Preliminary Plans (plan view only) - 35% Design Plans (Phases) - 65%, 90%,100% and Final (Note: Scale shall be 1 inch = 40 feet) Final Plans shall be provided on AutoCAD files with all the external references, survey, topo, etc. E-transmitted) shall also be provided to the City. 8. The construction plans, at a minimum, shall identify and provide details of point of connections to existing water main lines; and identify water main, service lines, valves, and appurtenances to be protected-in-place, abandoned, removed, replaced, or eliminated. 9. Complete Project Specifications and Special Provisions and complete Construction Bid Package including compliance requirements with local, state, and federal regulations and program requirements shall be provided with the 90% Design Plans submittal. Electronic copies of the Project Specifications (PDF and MSWORD file) shall also be provided. (City to provide to the selected Consultant the current Specifications Template for use/ reference.) 10. Complete Engineer's Cost Estimate (including list of quantities and estimated cost per unit) shall be provided with the 65%, 90%, & 100% Design Plans submittal. Quantities shall be shown on each plan sheets. Electronic copies of the Engineer's Cost Estimate (EXCEL file) shall also be provided. 11. The Consultant shall have all calculations, reports, specifications, and plans signed and stamped by a California Registered Civil Engineer. Such registrations shall be current. 12. All work submitted by the Consultant shall be complete and shall be carefully checked prior to submission. If the City discovers any errors or omissions prior to approving the Consultant's work, the work will be returned for correction and the Consultant will not be allowed additional compensation. Should the City or others discover errors or omissions in the work submitted by the Consultant after the City's approval thereof, the City's approval shall not be used as a defense by the Consultant. Online Q&A Yes Q&A Deadline 02/02/2023 3:00 PM (PST) Pre-Bid Meeting No The method of contractor has not been determined at this time.