Renovation of a residential development in Dubuque, Iowa. Completed plans call for the renovation of a residential development.

General o All work shall be of workmanlike manor and to finish standards of the City Lead Inspector. o All wood used on exterior of structures shall be treated and mid-grade quality or approved equal by City Lead Inspector. o All wood used on interior of structure shall be of mid-grade quality and free of knots, cracks, or otherwise deteriorated surfaces. o Any amenity in unit that is present before construction need to remain after construction. For example: If t.v. cables are in the room they need to remain in the room after construction. (ie cables, phone wires, electrical outlet access.) o Any mechanicals, windows, or doors shall have Energy Star rating. Window Installation All applicable permits apply. It will be the responsibility of the contractor to schedule the Building Department inspector to come to the project and approve the installation of the first window, per manufacturer recommendation. When project complete, the Contractor will be responsible for scheduling final inspection by the Building Inspector and FINAL ALL PERMITS pulled on the project. Proof of final permits will be required for final payment. Location and measurement (if specific due to window type) of window will be specified on bid if needed. It will be the responsibility of the contractor to measure and ask Inspector if there are questions. Replacement and new construction windows shall be Energy Star rated for the Northern Climate Zone and sized to fit the available opening. Window installation shall be according to manufacturer's written instruction. Replacement windows shall have a 10-year warranty minimum. Insulation required on all new window installations as follows: Follow manufacturer recommendation for type and installation method for insulation. Further guidance should be directed to City Inspector. When property is deemed National Register Eligible (NRE), the City's Planning Department shall approve window type and style prior to Contractor ordering windows for the project. Prior to install of windows, the Planning Dept or City Lead Inspector will ensure window style is approved on site and insulation technique agreed upon. Call the Planning Department at 563.589.4210. General window installation expectation shall follow IRC code requirements as follows. If you have questions, contact Lead Inspector or Building Department Inspector for guidance. Casement, Double Hung, Vinyl, and Pocket windows may all require slightly different manufacturer installation methods.