Site work and new construction of a pre-engineered storage facility in Hartford, Connecticut. Working plans call for the construction of a pre-engineered storage facility; and for site work for a pre-engineered storage facility.

As of 11/14/2023, no bids were received. Prefabricated steel buildings and cold storage shelters for the Department of Transportation, all using State Agencies, political subdivisions and not-for-profits. The Contractor shall offer Structures that conform to the following requirements: o Structures must range in size from 10' to 70' in width and to 90'+ in length. o Structures must be clear span and easy to assemble. o Structures may be portable, depending on the design. o Structures must include factory in-house design and engineering producing professionally engineered ("P.E.") stamped drawings. o Structures must meet wind, snow and seismic load requirements. This Contract is for the purchase of prefabricated steel buildings and cold storage roofing structures (the"Structure"). All Structures must use fourteen (14) to twenty-two (22) gauge steel coated with Galvalume Plus(R) or an approved equal by the Client Agency. The Structures must provide a clear span arch design eliminating the need for beams and trusses and must be able to be installed on pre-existing concrete foundation stem walls, concrete block foundations, and 8' by 40' and 8' by 20' corten steel storage shipping containers. Subcontracting is not allowed as stated in section 80 of the Contract. 1.) 20' 1.25" wide x 16' 4.375" high x 50' 5" long 2.) 45' wide x 18' high x 40' long 3.) 40' wide x 18' high x 80' long