Renovation of a water / sewer project in Port Huron, Michigan. Completed plans call for the renovation of a water / sewer project.

Provide a detailed bid to furnish all labor, material, equipment and all else necessary for the removal of 2 steel doors, cutting back an I beam, and replacing area with 6" brick wall and 3' x 4' window located at the Water Filtration Plant on Pine Grove Park Drive. A certified check payable to the City of Port Huron, or a satisfactory bid bond executed by the bidder and a surety company, in the amount equal to five percent (5%) of the bid, shall be submitted with each bid. No bid may be withdrawn for at least ninety (90) days after the scheduled closing time for receiving bids. All bids must be submitted on the bid form provided by the City of Port Huron via portal for that purpose. The City of Port Huron reserves the right to reject any or all bids, to waive any defects or irregularities in a bid, and to accept any bid which is deemed most advantageous to the said City's interests. The successful submitter will be required to furnish satisfactory insurance certificates. All submitters are required to qualify according to the bidder qualification regulations for contractors bidding on City of Port Huron contracts as set forth in the instruction to bidders. Submitters must comply with the City of Port Huron Uniform City Income Tax Ordinance. For questions regarding this project, please contact Jacob Chafins at (810) 984-9730. Question Acceptance Deadline 02/23/2023 03:00 PM EST Questions are submitted online No Remove double door, dispose offsite Provide and install temporary plywood covering for security during construction, Tarp interior office approx. 6' back from wall to be constructed for dust mitigation, Remove and store approximately 8 ceiling tiles and associated edge molding and cross-t's to access work area floor to lintel, Cut I beam back approximately 6" to bear on new 6" CMU wall (but not penetrate exterior brick veneer) Epoxy dowel #4 rebar into existing concrete wall at threshold, 32"O.C. Provide and install 6" block with horizontal Durawall reinforcing 16" O.C. and vertical #4 reinforcing 32" O.C. Provide and install thermal barrier, 1.5" rigid insulation, and brick veneer ties (24" O.C.) Provide rough opening for 3'x4'h window with limestone sill Brick infill veneer with toothed sides at opening where new brick meets old, Install 3'x4' fixed pane picture window with tempered glass with lintel, flashing, and sealant as required (Color = white, almond, or sand Modify and reinstall ceiling tiles / frame at newly constructed wall Paint interior of wall -- up to 300 SF, Primer and topcoat Clean up any work-related debris and demobilize