Site work for a road / highway in Litchfield, Connecticut. Completed plans call for site work for a road / highway.

For center line pavement markings on specified Town of Litchfield roads. No bidder may withdraw a bid within 60 days after the bid opening. EOE-AA. Question Deadline 04/10/2023 The Town of Litchfield reserves the right to waive the technical defects in the bids, to reject any bid which does not conform to the terms and conditions described in the bid documents, to accept or reject any part of any bid and to reject all bids and again invite bids. Scope of Work All painting shall be performed in a neat and workmanship like manner. Lines shall be sharp and clear with no feathered edges or fogging. Precautions shall be taken to prevent tracking by tires of the striping equipment and traffic. The contractor is responsible for any over spray resulting in damage to buildings, automobiles, or other town or personal property. It shall be the responsibility of the contractor to let the town contact know if weather conditions are not acceptable for painting. 2. Drawings, Codes, and Standards Epoxy: For epoxy refer to the State specifications, Section 12.10.03-Construction Methods, in the CT DOT form 818 manual. Materials shall be epoxy resin pavement marking paint in yellow or white using the CT DOT manual M.07.22 Specifications. See Article M.07.30 for glass beads. Waterborne Paint: (Hot Applied) For waterborne paint refer to the State specifications in the CT DOT form 818 manual. Materials shall be waterborne pavement marking paint in yellow or white using the CT DOT manual M.07.21 Specifications. See Article M.07.30 for glass beads. 3. Mileage The estimated miles of double yellow lines are fifty three (53) miles. The estimated miles of white lines are twenty nine (29) miles. Note: Some roads require white lines on each side. The estimated footage of "tails" are four thousand two hundred (4,240) feet.