Renovation of a municipal facility in Dickinson, Texas. Completed plans call for the renovation of a municipal facility.

SITE VISIT WILL BE HELD ON THURSDAY, FEBRUARY 16, 2023 FROM 10:00AM-5:00PM LOCAL TIME. VENDORS MUST PRE-REGISTER FOR SITE VISIT WITH JORGE NEGRETE AT 830-401-2055 OR JORGE.NEGRETE@NOAA.GOV PRIOR TO FEB 16, 2023. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a total small business set-aside. The associated NAICS code is 238220. The small business size standard is $19.0M. This combined solicitation/synopsis is for purchase of the following commercial services: Replacement of 3-ton air conditioning unit and air handler Description of requirements is as follows: Please refer to the attached Statement of Work for full technical specifications/requirements. See attached full Combined Synopsis with all terms and conditions which all vendors must be in compliance with to be eligible for award. Vendors must provide their Will or Will Not and Does or Does Not Statement per FAR Provision 52.204-24 which goes with FAR Clause 52.204-25. At a minimum, all quotes should include contact information and CAGE Code. Any questions that come up at the site visit must be provided to Michelle Walton via email at michelle.walton@noaa.gov no later than Feb 17, 2023 at 12:00 P.M. MDT/MST. No questions will be answered on site Replace the storage building air conditioner and associated equipment. A pre-bid site visit is highly recommended. It is the responsibility of the contractor to inform himself of all existing issues with the systems. The contractor shall provide pricing for each task The new unit will be like and kind to the existing with matching air handler and condenser, corrosion-coated condenser coils, and shall use R410A refrigerant. Size new refrigerant line sets and components to match the new unit. The contractor will reconfigure duct work as necessary to accommodate the new air handler. Work includes all required services for delivery and installation of the new units, as well as removal and replacement of the existing. The condenser shall have factoryinstalled corrosion coating. All exterior electrical piping shall be seal-tight flexible conduit. Insulate all copper piping to industry standards. The contractor is required to include any electrical system changes, and furnish new thermostat. The contractor will test the completed system and seal air leaks in duct work as necessary to meet air supply requirements. Ductwork needs to be tested to validate integrity. The contractor shall ensure the proper operation of the complete system. This is a turn-key effort within the scope of this contract. Task 1 - Replace AC Split System (Storage Building) Replace (1ea) Existing- 3-ton, A/C Unit model TTA042C300A0 and matching Air Handler. New units shall be Trane or equivalent.