Site work and outdoor lighting for a road / highway in Torrance, California. Completed plans call for site work for a road / highway; and for outdoor lighting for a road / highway.

Successful proposer shall install new decorative LED string lights in accordance with the suggested locations, patterns and layouts as shown on the attached plans to the satisfaction of the Community Development Director along the following street segments: 1) Post Avenue between Cravens Avenue and Sartori Avenue: This segment of Post Avenue is a two-way street and is approximately 55 feet wide and 560 feet long. The street segment consists of a mixture of single-story and two-story commercial buildings. Land use along this street segment is primarily commercial with a mixed use building located at the corner of Post and Sartori Avenues where residential use is located on the second level. 2) Marcelina Avenue between Cravens Avenue and Sartori Avenue: This segment of Marcelina Avenue is a two-way street and is approximately 55 feet wide and 560 feet long. The street segment consists of a mixture of single-story and two-story commercial buildings. Land use along this street segment is primarily commercial with two mixed use buildings where residential use is located on the second level. 3) Cravens Avenue between Torrance Boulevard and Carson Street. This segment of Cravens Avenue is a two-way street and is approximately 46 feet wide and 2,400 feet long. The street segment consists of a mixture of single-story and multi-story buildings. There are a variety of uses along this street segment which include retail, restaurant, professional/medical office, bank and residential. All LED string lights shall be installed with a minimum vertical clearance of 15'-6" from the street surface. Contractor shall provide a minimum of one-year warranty for labor, materials and workmanship under this project. Contractor must have the ability to mount string lights onto a variety of surfaces and structures including but are not limited to building facades, parapet walls, free-standing metal poles and/or steel extension poles. Contractor shall furnish all materials including but are not limited to LED string lights and related installation system, electrical components/circuits for power supply, transformers, electrical hook-ups, timers, mounting brackets, free-standing metal poles and steel extension poles where needed. Contractor shall furnish materials and install electrical timer with on/off switch (including location and accessibility). (Note: timer maybe of a smart type with the ability to be controlled remotely via a mobile device) Contractor shall find and connect potential power supply sources sufficient for electrical needs for the string lights for all street segments. Contractor shall furnish and install free-standing poles, steel extension poles, wall mounting brackets where necessary. The deadline to submit questions is 12:00 Noon Pacific Time on Monday, March 6th, 2023 Your questions should be directed to: Peerapol Suree, Planning Associate PSuree@TorranceCa.gov