Site work and paving for a mixed-use development in Longmont, Colorado. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

Question Acceptance Deadline 03/14/2023 07:00 PM EDT Questions are submitted online No The Town of Frederick is soliciting proposals from qualified consultants for the design of plans and specifications for the construction of the ultimate intersection improvements at the intersection of Silver Birch Boulevard (CR11) and Bella Rosa Parkway (CR20). This project area has been identified as a high priority short term, Tier 3 Intersection Improvement location in the Town of Frederick Transportation Master Plan with operations, widening with customized layout and configuration if challenges or deficiencies presented in the improvements are identified. Work in this project will consist of travel and auxiliary deceleration/acceleration lanes, striping and thermoplastic pavement markings, traffic signal operations, curb and gutter, sidewalk, ADA curb ramp and crosswalk features. To facilitate these improvements Right-of-Way (ROW) acquisition services will be required. The consultant selected through this RFQ/P process will provide professional services for the design and ROW acquisition phases of this project and as needed during construction. Prospective Bidders are invited to present their questions relative to their RFQ/P to the Town Engineer. Prospective Bidders are invited to present their questions relative to their RFQ/P to the Town Engineer. General Description The Town of Frederick has secured funds for the Design of the ultimate intersection improvements at the intersection of Silver Birch Boulevard (CR11) and Bella Rosa Parkway (CR20). Work in this project will consist of travel and auxiliary deceleration/acceleration lanes, striping and thermoplastic pavement markings, traffic signal operations, curb and gutter, sidewalk, ADA curb ramp and crosswalk features. To facilitate these improvements Right-of-Way (ROW) acquisition services will be required. The consultant selected through this RFQ/P process will provide professional services for the design and ROW acquisition phases of this project and as needed during construction. The design phase will identify more exact requirements, qualities, quantities and attributes for this work. Herein after referred to as "the exact work". Design will include ultimate intersection improvements at full buildout and interim intersection configuration for construction fitting existing conditions as determined during design phase and associated intersection traffic impact evaluation. The exact work shall be used to acquire ROW and complete the construction phase of the project. Services for identified ROW acquisition required for the project is expected to occur concurrent with design and is estimated to 2023-24. The construction phase of the project is estimated to begin in 2024-25 and shall finish in not more than 110- days following Notice to Proceed and commencement of construction